Instruction manual

1. Introduction

Shimadzu Electronic Printer EP-80 is designed to be used with Shimadzu Electronic Balances. It is

easy to operate and useful for a wide range of applications and measurement administration.

Capability of battery operation is convenient for field use and transportation. Printing method is impact

dot on normal paper, which is suitable for long term storage. Data output, auto print activation and

taring commands can be sent to an attached balance by the printer keys. Statistic calculation function

allows up to 1000 samples to be calculated and prints out the results.

Read this instruction manual carefully and use the balance correctly in accordance with the directions

in the manual. When you have finished reading the manual, keep it in a safe place together with the

balance so that you can refer to it at any time.

For information on the following points, please contact your Shimadzu Balance representative.

• Product warranty

• After service

Requests

• Provide this manual to the next user in the event that the instrument is transferred.

• To ensure safe operation, contact your Shimadzu Balance representative for installation,

adjustment, or reinstallation after moving the instrument to a different site.

Notices

• The content of this manual is subject, without notice, to modifications for the sake of

improvement.

• Every effort has been made to ensure that the content of this manual was correct at the time of

creation. However, in the event that any mistakes or omissions are discovered, it may not be

possible to correct them immediately.

• The copyright of this manual is owned by Shimadzu Corporation. Reproduction and duplication

of whole or part of the content without permission of the company are strictly prohibited.

• “Microsoft”, “Windows”, “Windows Vista” and “Excel” are registered trademarks of Microsoft

Corporation of the U.S.A. in the United States and other countries. All other company names