Instruction manual

1. Introduction
CAUTION
Avoid locations where the balance will be exposed to any of the
following.
Prohibitions
This could cause accidents or poor
performance.
● Extreme temperature changes
● Vibration
● Direct sunlight
● Corrosive or flammable gases
● Dust, electromagnetic waves or
a magnetic field
Install the balance on a strong and stable flat table or floor.
Placing the printer in an unstable site could lead to injury or trouble with the
balance.
Instructions
After a power outage, turn the power back ON.
When a power outage occurs, the power is shut off automatically. Therefore, begin
operation from “3.3 Installation”.
Instructions
Treat the balance with care and respect.
The printer is a precision instrument. Subjecting it to impacts could cause it to fail.
Instructions
If the printer has to be stored for a long time, store it in the packaging box in which it
was delivered.
Do not connect anything other than balance specified by Shimadzu.
In order to avoid trouble, always connect balance in accordance with the directions
in this manual.
Prohibitions
If you detect anything abnormal (e.g. a burning smell) disconnect the
AC adapter immediately.
Instructions
Continuing to use the balance with an abnormality could lead to fire or an electric
shock.
4