SOUND PANORAMA SON PANORAMIQUE SONIDO PANORAMA KLANGPANORAMA ЗВУКОВАЯ ПАНОРАМА OPERATING INSTRUCTIONS GUIDE D’UTILISATION INSTRUCCIONES DE FUNCIONAMIENTO BEDIENUNGSANLEITUNG РАБОЧАЯ ИНСТРУКЦИЯ
Safety Information READ THIS BEFORE OPERATING YOUR UNIT CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE FRONT OR BACK COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
2 Safety Information 4 Getting Started 4 What's Included 5 Parts Description 8 Installation 8 Installing the System 9 Installing the Remote Control Battery English Table of Contents 10 Connections 10 Subwoofer Connection 10 Connecting to HDMI Components 12 Connecting to Audio Components 13 Connecting the FM Antenna (Only for S9) 13 Power Connection 14 Operation 14 Listening to Your System 16 Listening to USB (Only for S9) 18 Listening to FM Radio (Only for S9) 22 Listening t
Getting Started What's Included Main unit 4 Remote control (1 ea) Battery (1 ea) HDMI cable (1 ea) Power adapter (1 ea) FM antenna (1 ea) (Only for S9) User manual (1 ea)
Getting Started English Parts Description Front Panel 1 1 2 2 3 4 5 Sherwood BRAND 3 Power Button Press to turn the main unit on or turn off to standby mode. Display Panel Displays the current status of the main unit. 4 Volume Controller Adjusts the volume level. 5 USB Port (Only for S9) Connects a USB device. Input Selector Rotate to select an input source for playback.
S9/S7 3D Sound Soundbar Rear Panel 8 1 7 6 2 3 4 5 1 HDMI OUT See page 10. 5 FM TUNER (Only for S9) See page 13. 2 HDMI IN 1/2/3 See page 10. 6 SUBWOOFER PRE OUT 1/2 See page 10. 3 DC IN See page 13. 7 AUX IN R/L See page 12. 4 Power Switch See page 13. 8 OPTICAL IN See page 12.
Getting Started 5 ( USB ) Starts or pauses playback. 1 11 SEARCH.M ( FM TUNER ) Searches FM tuner stations. 2 10 ( USB ) Stops playback. 3 9 4 MO/ST ( FM TUNER ) Toggles between FM stereo and mono modes. / ( USB ) Skips to the next or returns to the previous file or track. 8 REPEAT ( USB ) Selects a repeat function. < RDS/ RDS > ( FM TUNER ) Tunes to the previous or next RDS station. 7 5 6 English Remote Control 6 7 8 RANDOM ( USB ) Selects random playback.
Installation Installing the System To Install on a shelf You can install the main unit on a shelf. Place the main unit at a height close to ear-level in the listening area. When installing the main unit, use a stable surface to avoid accidents or injury. To Install on a Wall You can install the main unit on the wall. Before installation, see "CONNECTIONS" on page 10 and complete the wiring connections.
Installation 1 Press inward to release the lock (1), and at the same time, slide the battery holder out of the remote control with your fingernail (2). 2 Place the "+" (top) side of the battery down into the battery holder. 3 Push the battery holder back into its original position. English Installing the Remote Control Battery Caution •• If the battery is placed incorrectly, it can cause explosion. •• Use only one CR2025 (3 V) lithium battery.
Connections Subwoofer Connection You can enjoy deep bass sounds by connecting an active subwoofer. Connecting to HDMI Components With HDMI, you can easily enjoy high quality sounds and images. The main unit plays audio from HDMI compatible products while also passing on the video signal to a HDMIconnected TV. 1 (RIGHT) 2 (LEFT) Active Subwoofer Caution •• Do not place objects behind the subwoofer and block the ventilation ports.
Confirming the HDMI control functions To use the HDMI control functions properly, it is recommended to confirm the HDMI control functions usable with each connected component by performing the following operations. 1 Turn on all the components connected with HDMI cables. 2 Turn the TV off to standby mode. •• Confirm that all the components are turned off. 3 With all the components off, start playback of a device (connected with HDMI cable).
S9/S7 3D Sound Soundbar Connecting to Audio Components AUX Connection You can connect your audio devices to the unit and enjoy multichannel surround sound capabilities. •• Ensure the left (L) and right (R) channels and the inputs and outputs are correctly connected. •• To listen to the sound of a connected audio device, select AUX as the input source. •• To listen to TV audio, select TV as the input source. Optical Connection You can connect components equipped with an optical out jack.
Connecting the FM Antenna (Only for S9) You can listen to FM radio by connecting the FM antenna to the FM terminal on the main unit. To strengthen the signal reception, extend the antenna to its full length. Power Connection Make sure to plug in after you have connected all your components to the main unit. Plug the supplied AC input cord into the AC inlet and then into the wall AC outlet. Make sure to turn on the power switch after plugging in.
Operation Listening to Your System Basic Operation 4 Start playback of the component you selected in step 1. 5 During playback, you can adjust the volume level. •• On the main unit, rotate the volume controller. •• On the remote control, press VOLUME -/+. You can listen to audio by following the basic procedures below. 1 Turn on the connected component. 2 Turn on the main unit. •• On the main unit, press PUSH ON/ STANDBY. •• On the remote control, press ON/ STANDBY .
Selecting Surround Mode This system uses OPSODIS Technology, which generates spatial sound, without having to use walls to reflect the sound. This creates the illusion of three-dimensional acoustics and enables you to experience the film soundtrack and music with a power and intensity not previously achieved. However, the options available will depend on the type of source you're listening to. The following modes provide basic surround sound for stereo and multichannel sources.
S9/S7 3D Sound Soundbar Displaying Operation Status 1 Press DISPLAY. Each time the button is pressed, the display mode changes as follows: •• USB Playback file status → Repeat setting → Random setting → Playback file status Listening to USB (Only for S9) You can play audio files from a USB device. However, editing or copying the data file is not possible.
Operation 1 To Stop Playback 1 During playback, press . During playback, press REPEAT. Each time the button is pressed, repeat mode changes as follows: •• Repeat One Repeats the currently playing music file. •• Repeat Fol Repeats all music files in the folder. 2 To resume playback, press To Pause Playback 1 During playback, press . •• Playback will stop at the point where the button is pressed. •• To resume playback from this point, press the button again.
S9/S7 3D Sound Soundbar Listening to FM Radio (Only for S9) Auto Tuning 1 Press TUNE + or TUNE - for more than 2 seconds. •• The tuner keeps searching until a station with strong signal strength is found. The display shows the tuned frequency. •• If the station found is not the desired one, simply repeat this operation. •• Stations with weak signal strength are skipped during auto tuning. Auto Presetting 1 Press and hold down ENTER/MEMO for more than 2 seconds.
Manual Presetting Tuning in to Preset Stations 1 Tune in to the desired station with auto or manual tuning. 1 Select FM TUNER as the input source. 2 Press ENTER/MEMO. •• A preset number blinks. 2 Select a desired preset number by pressing PRESET - or PRESET +. 3 Select a desired preset number (1~30) by pressing TUNE + or TUNE -. •• A station has now been stored in the memory. •• A stored station is erased from the memory by storing another station in its place.
S9/S7 3D Sound Soundbar RDS Tuning RDS(Radio Data System) is a method for sending information signals together with transmitter signals. Your tuner is capable of translating these signals and displaying the information. These codes contain the following information: Program Service name(PS), A list of Program Types(PTY), Traffic Announcement(TA), Radio Text(RT). TP search Use this function to automatically search and receive stations broadcasting the traffic program.
Operation Use this function to automatically search and receive stations broadcasting a desired program type. 1 Displaying RDS information 1 Press DISPLAY. English PTY search In the FM mode, select the PTY search mode. •• "PTY SEARCH (PTY NAME)" is displayed. •• Each time this button is pressed, display mode changes as follows: Program Service → Normal (Frequency) name (PS) Radio Text (RT) ← Program Type (PTY) 2 3 While displaying "PTY SRCH", press < RDS or RDS > to select a desired program type.
S9/S7 3D Sound Soundbar Listening to Music via Bluetooth (Only for S9) 4 Press ENTER/MEMO to display the pin code(0000) on the display panel. 5 Press ENTER/MEMO. "PAIRING" blinks. 6 Search and pair the main unit with your portable device. The name of the main unit is displayed as "Sherwood S9" on your portable device. 7 When the pairing is complete, the paired device name is displayed on the display panel. The main unit uses Bluetooth wireless technology to stream music from your portable devices.
Settings 6 Press 7 Press ENTER/MEMO to confirm. •• To return to the previous menu, press . •• To exit the menu, press SETUP again. or to set a value. English Setting the System You can set additional sound settings. 1 Press SETUP. 2 Press or to select 1 SYSTEM SET or 2 HDMI SET. 3 Press ENTER/MEMO to confirm. 4 Press 5 Press ENTER/MEMO to confirm the selected setting. to select an option.
S9/S7 3D Sound Soundbar * Default settings are shown in bold below. Setting Option Descriptions 6hr STANDBY (Auto Standby) 4hr 2hr Sets the standby time for the system.
If you experience any of the following difficulties while using the system, use this troubleshooting guide to help remedy the problem before requesting servicing. Should any problem persist, consult your nearest authorized dealer or authorized independent company. If the unit does not operate normally due to external influence such as static electricity, disconnect the power plug from the outlet and insert again to return to normal operating conditions. GENERAL Problem Remedy The power does not turn on.
S9/S7 3D Sound Soundbar HDMI Symptom Remedy No picture or sound. •• If the problem still persists when connecting your HDMI component directly to your monitor, consult the component or monitor manual or contact the manufacturer for support. No picture. •• Depending on the output settings of the source component, the video format may not be displayed. Change the output settings of the source, or connect your source component directly to TV using the component or composite video jacks.
Specifications Rated power output Front Tweeter High/Low Front Woofer English Amplifier 25 W per channel (6 Ω, 1 %) Input/Output HDMI terminal Input Output Audio input HDMI INPUT x 3 HDMI OUTPUT 1 (ARC) AUX (Analog), Optical x1 (Digital) Speaker Woofer Type Impedance Tweeter Low Type Impedance Tweeter High Type Impedance 5" Cone Type 6Ω 1" Dome Type 6Ω 0.
Trademarks and Licenses This system incorporates a sophisticated Digital Signal Processor that allows you to create optimum sound quality and sound atmosphere in your personal Home Theater. DTS Digital Surround DTS Digital Surround (also called simply DTS) supports up to 5.1 discrete channels and uses less compression for high fidelity reproduction. Use it with DVDs and CDs bearing the DTS logo. Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S.
A R About HDMI 11 Auto Presetting 18 AUX Connection 12 RDS search 20 Rear Panel 6 Remote Control 7 B S Basic Operation 14 Bluetooth 22 Setting the System 23 STEREO 15 Subwoofer Connection 10 Surround Mode 15 C Connecting to HDMI Components 10 D Displaying the Operation Status 16 DOLBY Digital 15 DTS 15 F English Index T TP search 20 Tuning 19 Number 3D STEREO 15 3D SURROUND 15 FM Antenna 13 FM Radio 18 Front Panel 5 I Installing the Remote Control Battery 9 Installing the System 8 L Listeni
Memo
SOUND PANORAMA SON PANORAMIQUE SONIDO PANORAMA KLANGPANORAMA ЗВУКОВАЯ ПАНОРАМА Printed in China Imprimé en Chine Impreso en China Gedruckt in China Отпечатано в Китае
