A/V Receiver Operating Instructions

43
TONE DEFEAT :
Off
TONE CONTROL
RETURN:Back , :Select
BASS
----- + ----- 0 dB
TREBLE
----- + ----- 0 dB
OFF
OSD
POWER
MAIN
P
AG
E
FAV
MUTE
CH/
SET
VOL
RETURN
DISC
DISP
MI
ROOM 2
1
STEREO
7.1
SURR
CH
2
3
4
5
6
7
8
9
0
ENT
M2 M3
AUTO DSP
RNC-500
Press the CURSOR UP(▲)/DOWN(▼) buttons to select the TONE CONTROL, then press the ENTER
button.
1
When selecting the TONE CONTROL
ENGLISH
󳂮Note:
󳀏When the source direct function is activated, the TONE CONTROL cannot be selected.
󳀏Each time these buttons are pressed, the tone defeat mode
changes as follows:
On : Select this when listening to a program source without
↕ the tone effect.
Off : Select this when adjusting tone for your taste .
󳂮Note :
󳀏When the tone defeat mode is set to On, the tone (bass and
treble) cannot be adjusted.
Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to select the desired tone defeat mode.
2
󳂮When the tone defeat mode is set to Off to adjust the tone (bass and treble)
1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired tone mode.
󳀏Each time these buttons are pressed, “▶” is moved to the tone defeat mode or the corresponding tone mode.
2. At the desired tone mode, press the CURSOR LEFT(◀)/RIGHT(▶) buttons to adjust the selected tone as desired.
󳀏The tone level can be adjusted within the range of -10~+10 dB.
󳀏In general, we recommend the bass and treble to be adjusted to 0 dB(flat level).
󳀏Extreme settings at high volume may damage your speakers.
3. To complete tone adjustment, repeat the above steps 1 and 2.
OFF
OSD
POWER
MAIN
PAGE
FAV
MUTE
CH/
SET
VOL
RETURN
DISC
DISP
MI
ROOM 2
1
STEREO
7.1
SURR
CH
2
3
4
5
6
7
8
9
0
ENT
M2 M3
AUTO DSP
RNC-500