user manual

ManualsBrandsSherwood ManualsCassette PlayerCassette Player DD-6200

DD-6200(G) 2007.3.29 10:23 AM 페이지 1

Summary of content (17 pages)

PAGE 1
DD-6200(G)2007.3.
PAGE 2
DD-6200(G)2007.3.
PAGE 3
DD-6200(G)2007.3.2910:23AM페이지 2 Introduction READ THIS BEFORE OPERATING YOUR UNIT This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
PAGE 4
DD-6200(G)2007.3.2910:23AM페이지 3 CONTENTS Introduction Introduction �READ THIS BEFORE OPERATING YOUR UNIT .....................................2 Rear Panel Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Before Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 5
DD-6200(G)2007.3.2910:23AM페이지 4 Rear Panel Connections �Do not plug the AC input cord into the AC outlet when making connections. �Be sure to connect the white plugs to the L(Left) and the red plugs to the R(Right) jacks when making connections. �Refer to the connecting diagram in the operating instructions of AMPLIFIER/RECEIVER. ① REC INPUT JACKS Connect the cords between the REC INPUT jacks of this unit and the REC OUTPUT jacks of your amplifier.
PAGE 6
DD-6200(G)2007.3.2910:23AM페이지 5 Front Panel Controls ① POWER SWITCH Press this switch to turn the power on and press again to turn the power off. For system operation, plug the AC input cord into the switched AC outlet on amplifier or receiver, keep the POWER switch ON and control power ON/OFF with the power operation on the amplifier or receiver. ② HEADPHONE JACK Stereo headphones with a standard 1/4 inch plug can be plugged into this jack for private listening.
PAGE 7
DD-6200(G)2007.3.2910:23AM페이지 6 ⑨ PAUSE BUTTON( ) Press this button to temporarily stop playing back or recording. To restart, press the PLAY button. ⑩ REVERSE PLAY BUTTON( ) Press this button to play back the back side of the tape. ⑪, ⑬ FAST FORWARD and REWIND BUTTONS( ⑫ STOP BUTTON( ) ) ⑭ FORWARD PLAY BUTTON( ⑮ EJECT BUTTON( and ) ) � CASSETTE DOOR � DECK A/B COUNTER SELECTOR BUTTON Press this button to select the deck to be counted.
PAGE 8
DD-6200(G)2007.3.
PAGE 9
DD-6200(G)2007.3.2910:23AM페이지 8 Before Operation � NOTES ON CASSETTE TAPE �Before loading a cassette tape, take up the slack in the tape to prevent it from becoming entangled around the capstan. � CLEANING THE HEAD SECTION �For the best condition of the deck, always keep the head (recording/playback/erase), capstan and pinch roller clean. To clean them as follows; 1. Open the cassette door. 2. Clean the heads with the cotton swab dipped in commercially available head cleaner. 3.
PAGE 10
DD-6200(G)2007.3.2910:23AM페이지 9 Operations z PLAYING BACK TAPES Note : Do not use the metal tapes because these are not played back and recorded correctly. 1 Press the POWER swith to turn the power on. �Do not turn the power off while operating the unit. In this case, the tape door may not be opened. 2 Load the tape with the bottom side up and to close the cassette door, push the door gently until it clicks. 3 In case of the tape recorded with Dolby B NR, select the Dolby B NR mode.
PAGE 11
DD-6200(G)2007.3.2910:23AM페이지 10 6 To temporarily stop playback. (Deck A only) 7 To stop playback. �“ ” indicator lights up. �To restart playback, press the corresponding PLAY button. 8 To rapidly advance or rewind the tape, press the corresponding button in the stop mode. �At the desired point, press the STOP or corresponding PLAY button. AMS(Automatic Music Search) PLAY �The automatic music search function automatically skips other musics, finds and starts playback from the desired music.
PAGE 12
DD-6200(G)2007.3.2910:23AM페이지 11 RECORDING 1 Load a tape to be recorded into deck A. 2 : Recording of a single side. �Be sure the erase-protection taps on the tape are in place. �The type of tape(normal or chrome) is automatically detected. �The metal tapes are not recorded correctely. 3 When recording with Dolby B NR, select the Dolby B NR mode. 5 Press the RECORD/RECORD MUTE button to enter the recording pause mode Select the reverse mode. , : Recording of both side.
PAGE 13
DD-6200(G)2007.3.2910:23AM페이지 12 9 To stop recording. CD SYNCHRO RECORDING �When this unit is connected to a Sherwood compatible CD player controlled remotely by the DIGI LINK III system, the CD synchro recording can be performed. 1 Do the steps 1, 2 and 3 in “RECORDING” procedure. 3 Start CD synchro recording. 2 4 �The CD is selected automatically on the amplifier bearing the DIGI LINK III logo. �If 8 seconds elapses after starting recording, the CD player starts automatically.
PAGE 14
DD-6200(G)2007.3.2910:23AM페이지 13 DUBBING FROM DECK B TO DECK A 1 Open the cassette door by pressing the EJECT button and load a blank tape into Deck A and prerecorded tape into Deck B respectively. 2 �NORMAL : Normal speed dubbing. �HIGH : 1.5 times as fast as normal speed dubbing. �Because dubbing starts from the front side, if there is not the erase - protection tap on that side, dubbing can not be performed. 3 Start dubbing. �For better sound quality, select the normal speed dubbing mode.
PAGE 15
DD-6200(G)2007.3.2910:23AM페이지 14 Selecting the desired deck counter mode Resetting the counter �In each counter mode, you can reset the counter to “0000” or “00 min. 00 sec.”. Example) In the tape counter mode. �Select the Deck A or the Deck B counter mode as desired. �“ ” of the selected deck is flickering for 3 seconds and the corresponding deck counter mode is displayed. �When the unit is in the stop mode displaying a deck counter mode, playing or recording, etc.
PAGE 16
DD-6200(G)2007.3.2910:23AM페이지 15 Troubleshooting Guide If your unit should not perform as expected, consult the table below to see if the problem can be corrected before seeking help from your dealer or our service organization. PROBLEM POSSIBLE CAUSE REMEDY No power �The AC input cord is disconnected. �The POWER switch is not pressed completely. �Connect the cord securely. �Press the POWER switch to ON. No sound �Unrecorded tape is loaded. �Incorrect connections.
PAGE 17
DD-6200(G)2007.3.2910:23AM페이지 16 Specifications �TYPE . . . . . . . . . . . . . . . . . . . . . . . . . . . Stereo full logic double cassette deck with Dolby B NR system. �Track system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-track, 2-channel stereo �Recording system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC bias system (bias frequency : 105 kHz) �Erasing system . . . . . . . . . . . . . . . . . . . .