Product Manual

4
SP3062-3
SAFETY CONSIDERATIONS
This application procedure is not intended to supersede any company construction or safety
standards. This procedure is offered only to illustrate safe application for the individual.
FAILURE TO FOLLOW THESE PROCEDURES MAY RESULT IN PERSONAL INJURY.
This product may be removed and reinstalled during the initial installation if it is in good condition.
After extended service life, it is recommended the product not be reused once removed from service.
Do not modify this product under any circumstances.
This product is intended for use by trained technicians only. This product should not be used by anyone
who is not familiar with, and not trained to use it.
When working in the area of energized lines, extra care should be taken to prevent accidental electrical
contact.
For proper performance and personal safety, be sure to select the proper size PREFORMED
TM
product
before application.
PREFORMED products are precision devices. To insure proper performance, they should be stored in
cartons under cover and handled carefully.
World Headquarters:
P.O. Box 91129, Cleveland, Ohio 44101 • 440.461.5200 • www.preformed.com • e-mail: [e-mail]
Preformed Line Products (Canada) Limited:
1711 Bishop St. E, Cambridge, ON N1T 1N5 • 519.740.6666 • www.preformed.ca • e-mail: [e-mail]