Product Manual

3
INSTALLATION GUIDELINES
1. WEDGE-GRIP Dead-ends are precision
devices. To insure correct assembly, they
should be handled carefully and installed
as illustrated.
2. WEDGE-GRIP Dead-ends should
be stored in cartons under cover –
preferably shelf storage – until used.
3. WEDGE-GRIP Dead-ends may be
removed and reapplied for the purpose
of adjusting cabling installation.
4. WEDGE-GRIP Dead-ends should not be
reused after original installation.
5. WEDGE-GRIP Dead-ends should be
used only on the size strand for which
they are designed. (See table)
6. WEDGE-GRIP Dead-ends should not
be used as tools (e.g., come-alongs,
pulling-in grips, etc.).
7. If in doubt about an application, contact
your factory representative for an
engineering recommendation.
WEDGE-GRIP
TM
DEAD-ENDS
CATALOG
NUMBER
COLOR
CODE
EXTRA HIGH
STRENGTH
STRAND
(EHS)
WG-1250 RED 3/16”
WG-1251 YELLOW 1/4”
WG-1252 BLACK 5/16”
WG-1253 ORANGE 3/8”
FIGURE 6
NOTE: The PREFORMED
TM
Safety Guy Wire
Dispenser, Catalog No. SGD-0700, is a
perfect accessory when carrying and working
with extra high strength strand (Figure 5).