Instructions

Here is an interesting little program I wrote:
The atomic circle program
Figure 4
The entire program:
%
(atomic circle)
g90 g17 g40 g00 x0 y0 z0
g03 x0 y0 i0 j1 f100
g02 x0 y0 i0 j-1
g03 x0 y0 i1 j0
g03 x0 y0 i-1 j0
g18 g03 x0 z0 i0 k1
g02 x0 z0 i0 k-1
g03 x0 z0 i1 k0
g02 x0 z0 i-1 k0
g19 g03 y0 z0 j0 k1
g03 y0 z0 j0 k-1
g02 y0 z0 j1 k0
g03 y0 z0 j-1 k0
g90 g17 g40 g00 x0 y0 z0
m2
%
Run it on the backplot program. Millie could also run it, but you’ll have to change the
f100 feed program to f12 so Millie can handle it. Be sure the slides are located in a
position where the slides can be moved two inches (50 mm) in every direction. Single
47