Instructions

PART NO. REQ. DESCRIPTION
10930 2 3/8” Bearing
30560 4 10-32 T-nut
35580 2 Hold-down clamp
37090 1 Chuck adapter
37100 1 Rotary table base
37110 1 Rotary table top
37121 (1) CNC rotary table worm housing (Not sold sep.)
37131 (1) CNC rotary table worm shaft (Not sold sep.)
37122 1 CNC rotary table worm housing assembly
37123 1 CNC rotary table coupling
37124 1 CNC rotary table coupling adapter
37150 1 Oiler
37160 1 Preload nut
37170 1 Lock pin
37200 2 10-32 x 3/8” button head socket hd. screw
37210 1 Hold-down tab
37220 1 6-32 x 1/4” button head socket hd. Screw
40050 1 1-5/8” handwheel assembly
PART NO. REQ. DESCRIPTION
40330 2 10-32 x 5/8” SHCS
40420 1 Headstock bearing
40510 4 10-32 x 3/8” Socket head cap screw (SHCS)
40520 7 10-32 x 3/16” cup point set screw
40530 4 5-40 x 3/8” SHCS
40540 1 5/16-18 x 3/4” cone point set screw
40660 1 3/16” I.D. washer
40670 2 10-32 x ½” SHCS
50120 1 Pointer
67100 4 8-32 x 3/8” SHCS
67130 1 2 Amp, 100-oz., 23 frame size stepper motor
87041 1 120 VAC power supply (24 VDC, 1 amp output)
87100 1 Control unit with keypad/electronics (not shown)
87250 1 Motor-to-keypad 6’ extension cable (not shown)
87300 - Switched mini-DIN Daisy chain cable, (Optional)
87350 1 Remote (limit) switch/daisy-chain 1/2 cable
87510 1 CNC rotary table stepper motor mount
-16-