Sherline 5000 Mill General Manual

vertical milling column, knurling tool, a live center and many others. Remember that
accessories and attachments must be cared for in the same way as the lathe. Always make
sure that threads are free from metal chips and dirt. Chucks should be lightly oiled
frequently so that they continue to function smoothly and accurately. Gears in the thread
cutting attachment should be lightly greased when in operation. Some attachments have
moving slides and these should be lubricated in the same way as the slides in your lathe.
Each accessory comes with complete instructions for its use when it is purchased.
MILL EXPLODED VIEW PARTS DIAGRAM
Refer to part number list below drawing for part number name and material.
EXPLODED VIEW ONLY: To view and print out just the exploded view and part
numbers for reference, CLICK HERE for exploded view only. (Note: Requires Acrobat
Reader program to view.)