User Guide

eliminates one of the best features of Sherline machines...the ability to easily be put away
for storage.
FIGURE 10-Plans for mounting board hole patterns. Confirm actual dimensions from
your lathe or mill before drilling. The newly added model 2000 multi-direction mill can
be mounted to a board 12" x 18" in a similar fashion.
The mill may be mounted in a similar manner on a 10" x 12" to 12" x 24" pre-finished
shelf board with rubber feet using 10-32 x 1" screws to attach the mill to the board.
To keep your Sherline tools clean, soft plastic dust covers are available. The lathe cover
is P/N 4150 for the Model 4000/4100 and 4500/4530 short bed lathes and P/N 4151 for
the Model 4400/4410 long bed lathe. A mill dust cover is available as P/N 5150.