Specifications

Page 10
Skipping to a particular point in a track
• Make sure that the disc is playing the desired track.
• Press the Reverse button on the remote control, the CD will then rewind within the track. Press
again and the disc will rewind faster. Press a third time and the disc rewinds even faster. Press
a fourth time and the disc will resume normal play or press Play to resume normal speed. The
button does not need to be held down during this function.
• Press the Forward button on the remote control, the CD will then fast forward within the track.
Press again and the disc will fast forward faster. Press a third time and the disc fast forwards
even faster. Press a fourth time and the disc will return to normal play or press Play to resume
normal speed. The button does not need to be held down during this function.
Repeating one track or an entire disc
• Make sure that the disc is playing.
• Press the Repeat button on the remote control. REPEAT ONE will appear on the display. This
will cause the current track to repeat.
• Press the Repeat button again and REPEAT ALL will appear on the display. This will cause the
disc currently in the CD-1 to repeat.
• Press the Repeat button a third time and REPEAT OFF will appear on the display and the CD-1
returns to normal playback functions.
Changing what is shown on the display
• Press the Display button on the remote control to change the information on the front panel
display.
Disc Handling
• Replace the disc into its sleeve or jewel case when not in use.
• Avoid touching the playing surface of the disc.
• If the disc becomes dirty, wipe gently with a soft clean cloth. Wipe in a motion from the center to
the edge of the disc (do not wipe in a circle parallelling the audio tracks).
• If necessary, a CD may be cleaned with water or a mild cleaning solution. If so, rinse the disc
carefully and dry it thoroughly after cleaning. Ensure that the disc is totally dry before inserting it
into the CD-1.
• Do not leave the disc in bright sunlight for extended periods of time.
• Do not write on either surface of the disc with a hard-tipped pen.
• With CD-R’s, only write on the label side with soft-tip markers; NEVER use ballpoint pens or
pencils. Avoid dropping keys or hard objects onto the label side of CD-R discs. (CD-R’s are very
sensitive to damage on the label side even though prerecorded CDs are not).