Specifications
Page 9
Operation
Turning the CD-1 On
• To turn On the CD-1, press the Standby/On button on the front panel of the unit or the Standby
button on the remote control. The display will read SHERBOURN for a few seconds at power
up. LOADING will then appear on the screen. The player will then say READY.
Loading and playing a disc
• Make sure the CD-1 is on.
• Insert a Compact Disc gently into the slot loader. Allow the slot loader to take the disc from
your hand; there will be a short delay. (If the CD-1 does not say READY at power up, a disc is
already in the player.
• The disc will start playing automatically when it is loaded. If a disc is already loaded, it will start
playing at Power Up.
Note: Do not put anything except a Compact Disc into the disc loader; foreign objects may
damage the CD-1.
Note: Do not insert discs that are wet, have foreign materials stuck to them, or are warped.
Note: Do not force discs into the slot-loader.
Note: If the Compact Disc is too dirty or scratched the disc may not play.
Note: Never load more than one disc into the player at one time.
Stopping / pausing a disc
• Press the Stop or Pause button on the front panel of the unit or the remote control. When the
disc is paused the display will read PAUSE. Play can be resumed by pressing the Play/Pause
button again.
Ejecting a disc
• Press the Eject button on the front panel of the unit or the remote control.
Playing a specic track
• Make sure that a disc is in the player.
• Enter the number of the track you wish to play on the numeric keypad on the remote control.
• Alternately, pressing the Next Track button on either the CD-1 or the remote control will move
the CD playback forward to the next track and pressing the Previous Track button on either the
CD-1 or the remote control will move the CD play backward to the previous track. Repeat as
necessary to nd the desired track.