Important Safety Precautions and Explanation of Symbols ! The exclamation point within an equilateral triangle is intended to alert the user to the presence of important installation, operation, and service instructions in this manual. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltages within the enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to the user.
The CD-1 should only be cleaned as directed in the Installation and Operation Manual. Avoid spraying liquids directly onto the CD-1 and NEVER spray liquids into the vents or CD loading slot. Care should be taken so that small objects do not fall into the inside of the CD-1. ! You should seek service for your CD-1 by qualified service personnel if any of the following occur: 1. The power-supply cord or the plug has been damaged 2.
CD-1 Audiophile Compact Disc Player Contents Important Safety Precautions and Explanation of Symbols Introduction..................................................................................................2 The Sherbourn CD-1...................................................................................2 About This Manual.......................................................................................2 Mechanical and Environmental.............................................................
Introduction Thank you for choosing the Sherbourn CD-1 Audiophile Compact Disc Player. The Sherbourn CD-1 combines the superb sound quality and usability features necessary to satisfy the most discerning audiophile with the flexibility and reliability demanded by professional installers. The result is a CD player that is easy to install and configure, sounds great, and will continue to deliver trouble-free performance for many years to come.
Mechanical and Environmental Dimensions: 17” wide x 5.75” high x 14” deep (with feet, no rack ears) 14” 5.75” 17” Weight: 17.
Inputs and Outputs CD loading mechanism: Toshiba slot-load CD engine Analog outputs: Balanced audio (XLR), unbalanced audio (RCA) Output level (analog): 2 V RMS (7 V peak) Digital outputs: Optical (Toslink), XLR (AES/EBU), coaxial (RCA) Note: All audio outputs remain active at all times.
Installation Tips Inputs and outputs Balanced (XLR) audio interconnects usually provide better noise immunity, and are preferable especially for long cable runs or in noisy environments. Because of the audiophile-quality conversion and analog output circuitry in the CD-1, better audio performance may be achieved by using the analog outputs from the CD-1 rather than by using the digital outputs and allowing another component to perform the A-to-D conversion.
Configuration Verify that the CD-1 is configured for the correct operating voltage for your area. (Voltage is set via the Input Voltage switch on the rear panel of the CD-1).
Performance Specifications Types of media and data formats supported: • • • • Standard (Red Book) prerecorded audio CDs Standard audio CDs with HDCD™ encoded content CD-R media with standard audio CD content CD or CD-R media with MP3 content (single flat directory structure) CD loading mechanism: Toshiba slot-load CD engine Front panel controls and indicators: Pushbutton with indicator LEDs, blue VFD status display Remote control: Infrared, solid machined aluminum Output level: 2 V RMS (7 V peak) Freque
Features The CD-1 combines the latest cutting edge technology with solid engineering and high quality components to deliver superior audio performance and features.
Operation Turning the CD-1 On • To turn On the CD-1, press the Standby/On button on the front panel of the unit or the Standby button on the remote control. The display will read SHERBOURN for a few seconds at power up. LOADING will then appear on the screen. The player will then say READY. Loading and playing a disc • • • Make sure the CD-1 is on. Insert a Compact Disc gently into the slot loader. Allow the slot loader to take the disc from your hand; there will be a short delay.
Skipping to a particular point in a track • • • Make sure that the disc is playing the desired track. Press the Reverse button on the remote control, the CD will then rewind within the track. Press again and the disc will rewind faster. Press a third time and the disc rewinds even faster. Press a fourth time and the disc will resume normal play or press Play to resume normal speed. The button does not need to be held down during this function.
Periodic Maintenance The Sherbourn CD-1 unit requires no periodic maintenance. Cleaning the CD-1 • • If necessary, the CD-1 should be cleaned gently with a soft rag. If something sticky gets on the front panel or case of the CD-1, it should be cleaned with a mild cleaning solution applied to a soft rag, followed by wiping with a clean rag dampened with plain water and drying with a soft dry rag or cloth.
Troubleshooting Problem: The CD-1 operates erratically or fails to operate • • Verify that the CD-1 is plugged into an active electrical outlet of correct voltage (if a switched outlet was used, verify that it is On) Verify that the Input Voltage switch on the rear panel of the CD-1 is set to the correct voltage Problem: The CD-1 does not load a disc when it is partially inserted • • Verify that the CD-1 has power and is turned on Verify that there isn’t already a disc in the CD-1 Problem: The CD-1 has
Sherbourn Technologies, LLC Ten-Year Limited Warranty What does this warranty cover? Sherbourn Technologies, LLC (“Sherbourn”) warrants its products against defects in materials and workmanship. This warranty is subject to revision at any time.
DAMAGES ARISING FROM OR RELATED TO ANY DEFECTS IN OR DAMAGES TO ITS PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY. How do you get service? In order to make a claim under the warranty, you must: 1. Call a customer service representative (“CSR”) of Sherbourn at (1-877-EMO-TECH / 1-877-366-8324).
Internal Laser Radiation Emission Parameters: Wavelength 790nm (+-15nm) CW power for classification <290uW Wavelength 650nm (+-10nm) CW power for classification <311uW No laser radiation above Class 1 levels accessible to user. Label Data: “Class 1 Laser Product” (explanatory label) location: Rear Panel Manufacturer’s ID & Certification Statement location: Bottom Complies with FDA performance standards for laser products, except for deviations pursuant to Laser Notice No.
