User manual

Page 44
PT-7030: User Manual
XLR Connector Pinouts
The XLR audio connectors on the PT-7030 use industry standard pinouts:
1 = ground (G)
2 = signal plus (+)
3 = signal minus (-)
Trigger Levels
Each trigger output on the PT-7030 delivers a +12 VDC regulated output when active, and can
source up to 100 mA (each).
Periodic Maintenance
The Sherbourn PT-7030 requires no periodic maintenance.
Cleaning the Sherbourn PT-7030
• If necessary, the Sherbourn PT-7030 should be cleaned gently with a soft rag.
• If something sticky gets on the front panel or case of the PT-7030, it should be cleaned with a
mild cleaning solution applied to a soft rag, followed by wiping with a clean rag dampened with
plain water and drying with a soft dry rag or cloth.
Note: DO NOT spray water or cleaning solution directly onto the Sherbourn PT-7030 or into
the vents.