User manual

Page 26
PT-7030: User Manual
Conguration and Operation
Note: The On-Screen Display (OSD) is ONLY displayed on the HDMI outputs.
Input Conguration Paradigm
The PT-7030 allows any input connector to be assigned to any input source using the Input Setup
conguration screen.
By default, the source input buttons are congured as follows:
Input Input Connector
Input 1 Reference Stereo (balanced)
Input 2 Tuner
Input 3 Analog 1
Input 4 Analog 2
Input 5 Analog 3
Input 6 Analog 4
Input 7 Analog 5
Input 8 Analog 6
Note: When using HDMI video sources, it is a good idea to also connect the matching
composite video input connections from each source. This will allow you to use those
source components with Zone 2, Zone 3, and Zone 4 (only composite video is routed to the
additional zones).
Note: When using digital audio input connections, it is a good idea to also connect the
matching analog input connections from each source component. This will allow you to use
those source components with Zone 2, Zone 3, and Zone 4 (only analog audio is routed to
the additional zones).
Note: Operation of the PT-7030 is relatively straightforward, and some screen hints are
provided to make navigation easier.
On certain Menus (like Input Setup and EQ), each screen contains a “page” of related
information. (Each Menu screen under Input Setup shows the information for one input, with
the top line showing the name of the input. The Left/Right buttons navigate to the screen for
the previous/next input.)
On some menus, Yes / No choices lead to additional screens with additional options.
(On the Preferences screen, setting Default:NO and pressing Enter does nothing, but setting
Default:YES and pressing Enter opens a screen containing several options related to saving
and retrieving default settings.)