User manual
Page 25
PT-7030: User Manual
Video Mode Support and Upsampling Options
HDMI Inputs
Signals received at the HDMI inputs of the PT-7030 are passed directly to the HDMI outputs without
resampling to ensure the best possible output quality. Video signals received at the HDMI inputs are
not available at the composite or component outputs.
Note: The output resolution is specied in the Video/HDMI Setup menu. This setting ONLY
applies to analog video inputs; HDMI inputs are ALWAYS passed through to the output at the
resolution in which they are received.
Composite and Component Inputs
Signals received at the composite inputs are passed directly to the composite outputs at the same
resolution in which they are received.
Signals received at the component inputs are passed directly to the component outputs at the same
resolution in which they are received.
Signals received at the composite and component inputs are upscaled at high quality to the output
resolution selected in the Video/HDMI menu and are available at the HDMI outputs at resolutions
(up to 1080p).
Note: The output resolution is specied in the Video/HDMI Setup menu. Analog video inputs
at any resolution will be converted to the selected resolution for output (except 3D or
1080p/24).