User manual
Page 21
PT-7030: User Manual
Rear Panel - Audio Outputs (Secondary Analog Outputs)
1. Zone (audio) Outputs
Provide separate stereo unbalanced audio outputs for each secondary zone (Zone 2, Zone 3,
and Zone 4).
Each zone audio output may be congured to deliver the same signal as is playing in the main zone
(by selecting Source in the Zone Setup Menu for that zone). When audio for a zone is set to Source,
both analog and digital sources will be routed to the zone if they are playing in the main zone.
Each zone audio output may also be congured to deliver audio content from a different source
than the source selected for the main zone. In that case, however, you may ONLY choose ANALOG
audio sources.
Note: If you wish to be able to select a specic signal source to listen to in one of the
secondary zones when that source is NOT selected in the main zone, then you MUST
connect an analog version of that source. (The PT-7030 can ONLY play a digital audio source
in a secondary zone if that source is selected in the main zone, and the secondary zone is set
to Source.) For example, if you have your CD player connected to your PT-7030 via a digital
connection, but you wish to also be able to listen to CDs independently in Zone 2, then you
must ALSO connect the analog audio connection between the CD player and the PT-7030.
2. Audio Out
Provides a stereo analog audio output for connecting to the input of a video recorder.
®
1 2