Installation Instructions

D I R E C T I O N S F O R U S E :
1. Remove any spillable contents from appliance.
2. Slide appliance away from wall so all sides are
accessible.
3. Loosen wing nut inside the roller.
4. Adjust roller to depth of appliance and tighten
wing nut.
5. Tilt appliance and slide roller into position
underneath. Lower appliance onto roller,
making sure appliance levelers rest on pads.
6. Repeat procedure for opposite side. Make
sure rollers are parallel.
CONTAINS:
1 Pair adjustable heavy duty
appliance rollers
Supports up to 3,000 lbs.
FEATURES:
Non-skid pad
Support saddle for added
strength
Non-marring smooth surface
wheels
Adjusts from 18-1/4" to 28"
(46.35cm to 71cm)
Note:
• It is suggested that rigid gas or water
connections be replaced with flexible
connectors.
• It is recommended that a plywood baffle be
used on refrigerators with forced air cooling.
• NOT recommended for hard wood floors; may
cause indentations.
ALSO AVAILABLE…
Protect your floors & household surfaces
with other surface protection products:
• Casters (Chairs, Cabinets, Tables)
• Chair Glides (Chairs, Tables)
• Felt & Bumpers (Stools, Small Appliances)
• Caster Cups (Carpet & Hard Wood Floors)
• Chair Tips