Operating Instructions

XT-3 Wlire less earphone operating instructions
Charging the charge case
Put the earphones in the charging case, the green indicator light means
charging, light off means it is fully charged.
After the earphone have connected with the phone, there is a battery
mark next to the bluetooth or earphone symbol to display the battery
level.
Where to see the power display?
green light means
charging
Light off menas
charged fully
Method one:
After fully charged, take two earphones and wait about 5 seconds,
the red and blue lights flash, turn on Bluetooth on the phone, search
for the pairing name "XT-3" and click to connect.
Method two:
Charging the earphone
Dual earphones mode
After fully charged, take two earphones and touch about 5 seconds,
the red and blue lights flash, turn on Bluetooth on the phone, search
for the pairing name "XT-3" and click to connect.
Single earphone mode
Method one:
After fully charged, take one earphone and wait about 5 seconds, the
red and blue lights flash, turn on Bluetooth on the phone, search for
the pairing name “XT-3" and click to connect
Method two:
After fully charged, take one earphone and touch about 5 seconds,
the red and blue lights flash, turn on Bluetooth on the phone, search
for the pairing name “XT-3" and click to connect
Earphone operation function
Power on: light touch 5 seconds
Power off: light touch 5 seconds
Next song: Double touch the right earphone
Previous song: Double touch the left earphone
Volume up: Triple touch the right earphone
Volume down: Triple touch the left earphone
Answer the call: Light touch either side
Reject the call: Light touch 2 seconds either side
Wake up voice assistant: Light touch 3 seconds either side
Chinese and English prompt tone switch
Double-click two earphone at the same time without connecting to
Bluetooth
Standard accessories
Charging cable earphones + charging case
About Signal
1.Please notice the wearing method, do not cover the earphone by
ear to prevent interruption of signal.
2.Do not cover any one earphone on the dual earphones mode by
hand, or it will result the interruption of signal.
3.Please use this earphone under its working range (10 meters) and
for best results avoid obstacles in between the connected devices.
4.On the dual earphones model, sometimes the connected of “R”
maybe interrupted, please check the using condition or the working
range.
How to wear the earphone
Parameters of earphones:
Model name: XT-3 Talk time: 4H
Version: 5.1+EDR Music time:4H
Charging Voltage: DC 5V Work range:10m
Battery Voltage:3.7V headphones capacity: 25mAh
Charging time: 0.8H Standby time: 40h
The specification of charging case:
Input earphones Current: 5V/100mA
Battery capacity:25
0mAh
Charging times for earphones: 2-3times
Warning
1. Please do not take the earphones apart and remodel, otherwise, it may
cause electrical breakdown by the fire or even completely damage the product.
2.Please do not put the product to too high or too low temperature(Below 0°C
or above 45°C).
3.Please avoid using the device indicator light near the eyes of children or
animals
4.Please do not use the device under thunderstorms. It may cause the device
to malfunction and increase the risk of electric shock.
5.Please do not wipe the product with oil or other volatile liquids.
6.Please do not let the device get wet with liquids.
Note
It may cause hearing damage under longtime using, please arrange the use
time reasonably.
Insert the charging cable into the charging port, the red light
flashing means charging, red light Chang Liang said has
been full of
XT- 3
XT- 3
XT- 3