Safety Information

40min

2. Insert the attached charging cable into the charging port of the car

and connect the power supply for charging. (as picture shows)

ݻ⭫᤽⽰⚥

Red light

Extinguish

/('⚥Ӥ

➺⚣

G. The push rod rotate 90° clockwise done, launch port

finished.

H. The remote and the car must be off at the same time,

and then plug the car into the remote charging port

for charging.

I. After the vehicle is plugged into the charging port,

switch the remote switch to the charging mode.

J. Then the default red led of the remote is long light. If

the charging led light of the remote is off, means the

charging is completed. (Short press channel 3 to switch

the color of the multi-color light, long press channel 3

to switch the breathing light).

Note: Before charging the car, make sure the charging plug is dry.

Do not leave when charging the car.