Safety Information

12
Troubleshooting
Fault symptom Cause of failure Solutions
The tranmitter connection
failed
Freeze
1. Distance is too far
2. Multicars pairing at the
same time
No reaction when remote
control left and right
steering / no response
when steering
The steering is in the
opposite direction of the
remote steering operation
When the throttle is in
neutral position, the car
immediately starts to
move forward or backward
The car cannot move in a
straight line/The left and
right steering radius is
significantly different
The maximum speed
cannot be reached
Overheating in the motor
part
The power-on light is not
on
Shutdown
Charge in a timely manner
Make sure that the product is in car
receiving mode.(The headlights flash).
The steering angle is set
too small
Reset the steering angle
The remote steering
reverse switch is not
properly set
The throttle fine-tuning
does not set to the center
position
Set the remote throttle fine-tuning to the
center position
Set the remote steering reverse switch to
the correct direction
Steering fine-tuning is not
set to the center position
Ambient temperature is too
high
The car should be immediately turned off
and placed in a cool, well-ventilated place
for cooling to avoid damage to electronic
parts
1. The throttle DR setting is
too small
2. Battery Low
3. Foreign objects between
the wheels
Set the throttle DR size on the remote
throttle DR, and check for foreign objects
and battery level
Set the steering fine-tuning to the center
position
Foreign object between
the wheels
Check the wheels for foreign objects
The voltage is less than
3.0V and there is not
enough power