User's Manual
If the 2.4G receiver cannot pair with your computer, press Fn+R simultaneously about 6 seconds;
make sure the keyboard is within 7.87inches/ 20cm away from the USB receiver when connecting
to your device; insert the receiver when the light flashes quickly to connect.
Power Management
Power Saving Mode
1. In BT and 2.4G mode, if there is no operation for 2 minutes, it will enter into power saving
mode.
2. All backlights are turned off, and it will enter deep sleep mode without any operation for 10
minutes.
3. In BT and 2.4G mode, holding down “FN+Space” simultaneously for a few seconds will enable
the battery display function. In this state, only 1-0 keys will light up green. “1” key is on green
indicating 10% of the battery left. “1” “2” “3” keys are on green indicating 30% of the battery left
and so on. Releasing “FN+Space” keys to exit the display of battery.
Important Safeguards and Precautions
1. SAVE THESE INSTRUCTIONS—They contain essential safety and operating instructions.
2. For indoor use only. Do not expose the keyboard to direct sunlight or wet conditions.
3. Do not use the keyboard if equipment is damaged.
4. Do not disassemble the product. Disassembly can result in safety hazards.
5. Do not throw or shake the product.