User's Manual

1. MFB (Power on / Power off / Call / Pair button)
2. Volume +
3. Volume -
4. Bluetooth LED indicator
5. Microphone
Power on / off
Powering on
 Ensure the headphones are turned off.
 Press and hold on the MFB button until a “Power on” voice prompt is heard then
release the button, then the headphone will enter into pairing mode
automatically signed with LED flashes blue and red alternatively.
 There will not be the solid or flashing blue light on the right side to indicate that
the “C10 ” is powered on
Powering off
 Ensure the headphones are turned on.
 Press the MFB button until the right Led indicator light turns solid red with a
descending sound, a “Power off” voice prompt will be heard when the
headphone is powering off.
Pairing the device
1. Making sure there is power remaining in C10.
2. Press and hold the MFB button (1) until the LED indicator (4) flashes in blue once
then in blue and red alternatively which indicates that the headphone entered
into pairing mode. You will hear the voice prompts “Power on” then it will wait
for pairing.
3. Enable searching of nearby Bluetooth devices using the Bluetooth menu on your
device.