Bluetooth Neckband User Manual baishuo C10
Important Safety Instruction If used in the correct method, this design and production of this product can ensure your personal safety completely. However, any inappropriate use may lead to potential risk and danger of electric shock or fire hazard. Please read all the safety instructions before installing and using the product. In particular, attention shall be given to the following information: 1. It needs to be stored or used in the ambient temperature. 2.
1. MFB (Power on / Power off / Call / Pair button) 2. Volume + 3. Volume 4. Bluetooth LED indicator 5. Microphone Power on / off Powering on Ensure the headphones are turned off. Press and hold on the MFB button until a “Power on” voice prompt is heard then release the button, then the headphone will enter into pairing mode automatically signed with LED flashes blue and red alternatively.
. Select “C10” from the Bluetooth device list on your mobile phone. If connected, a voice prompt “your headset is connected” will be heard and the headphone will enter into standby mode. Note: (1) If the headphone can not finish the procedure of pairing within 3 minutes, the headphone will turn off automatically after a “Power Off” voice prompt. (2) After pairing, when the headset connection is disconnected, a voice prompt “ your headset is disconnected” will be heard.
Redial the last dialed number In standby mode, double-click the MFB button to redial the last number dialed Charging the battery Fully charge the battery for about 2 hours before using this headphone for the first time. Plug the smaller end of USB charging cable into the interface of the USB charging port. Next, plug the other end of the USB charging cable into other power charging devices or a computer with the power on. The led indicator will keep in Red during charging.
1. Sports Neckband GIZ MN218 2. Micro USB charging cable 3. Earbuds 2 Pairs 4.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
