User Manual

尺寸：142*210mm
材质：100G书写纸
要求：单黑印刷，折页
TWS FUNCTION DESCRIPTION
Connect up to 2 speaker to get an immersive and explosive sound experience.
.After powering on both the units, long press 2 speakers’ “TWS” key
at the same time. Both screens will display “CON” and release voice
prompts “left channel” & “right channel”. This indicates the TWS
connect is successful.
.Then pair the mobile device with the speaker in the normal way
and search for “V10”
.If you want to disconnect TWS connection, long press 1 speaker’
“TWS” key.
EQ FUNCTION DESCRIPTION
FEATURE MP3 Functor Description
FM Function Description
Microphone Function Description
Bluetooth Function Description
PANEL FUNCTION
FUNCTION DESCRIPTION
MUSIC PLAYING TROUBLESHOOTING
CHARGING INDICATION
GeneralFunctionDescription
Pairing With Bluetooth Enabled Devices (Mobile Phones/tablets Etc.)
Charging the Speaker (3.7V rechargeable battery built-in)
Issue 1: Speaker is unable to connect successfully to your mobile device
Cautions:
Accessories
1.There are 6 modes of EQ, Normal/Pop/Rock/Jazz/Classic/Country.
1.Keep the speaker and device within 1 mater of each other.
2.Once the speaker is powerd on,press the mode switch to enter BT
Mode.the LED screen with display‘red’
3.Start the Bluetooth function on your mobile device and look for
‘V10’in the Bluetooth device list.
4.After successfully connecting,the speaker will prompt.
5.To un-pair,long-press the Play/Pause key.
1.Stylish,FashionableandElegantAppearance
2. Strongbass,ClearandRichVocal
3. DesignedwithPatentedSoftMetalTechnology,anti-scratchouter
shelland Woodeninnerbox
4. MusicplayingthroughBT,USB,MicroSDandLineinconnection
1.Insert USB Disk or TF Card to play stock music in MP3 format.
2. Play Pause Break: Short press to play/pause
3. Previous/Next Song Key: Short press to Previous/Next Song
1)Long press power button to turn on/off.
2)Quick Click for switch mode.
3)Long press microphone button to adjust the Echo. Short press to
adjust the microphone volume.
2.Long-Press Play/pause buttom to enter automatic channel scanning.
3. Previous/Next Song Key: short press to stocked previous/next radio
Note: Please automatic searching radio when first use
1.Mode
9.USB Merory Card Slot
10.AUX in port
11.USB 5V input interface
1.short press Play Pause and Previous/Next Keys to control the respective
operation.
Speaker *1
User Manual *1
USB Charding cable *1
Bluetooth Version: 5.0
Sperker Output: 9W
Battery Capacity: 3.7V 1200 mAh
Function: Bluetooth,AUX-IN,Mic,USB Flash
TF&DM Radio,Echo and EQ Funciton
Music Playback Time: 3.1 hours
Frequency Response: 75HZ-18KHZ
S/N Ratio: 86dB
Dimensions: W275mmXH325mmXD145mm
Product Weight: 1.45kg
3.Microphone 8.Microphone input port
1.Short-Press MODE switch to enter FM Mode.
1. You can use the mic once insert it, "MIC"on the display will light on
6.Play/Pause
2.EQ Volume 7.Precious song
5.Next song
4.Volume Button
1. Charging is needed when the battery symbol is empty and twinkle, the
product will into low power self-protect state the volume will drop to 70%
please use our adapter to charge Red light on when charging and of
when charging is finished
2 Note: Please charge for more than 12H for first time, please keep battery with
electric f to battery doesn't work for long time, or the battery will damage
successfully to your mobile device
Problem 1: Speaker's battery is flat
Solution: Fully charge the speaker and retry connection with your mobile
device.
Problem 2: Speaker not paired to your mobile device
Solution: Make sure that the speaker is successfully paired upon selecting
＂V9"in the device list.
Problem 3: Speaker and mobile device too far apart
Solution: Make sure that the speaker is within a meter range during pairing
and connection.
Problem 4: Speaker is connected to other mobile device
Solution: Make sure that the speaker has already been disconnected before
making a new connection with a new device.
lssue 2: Sound from the speaker is too soft or silent
Problem 1: Speaker's battery is low/flat
Solution: Fully charge the speaker and retry connection with your mobile
device.
Problem 2: Speaker or mobile device's volume is too low
Solution: Turn the volume of the speaker or mobile device up to increase
the volume.
Problem 3: Music track may not be audible
Solution: Make sure that the music track is of a playable format for the
mobile device.
Problem 4: Speaker and mobile device might not be connected properly.
Solution: Repeat the connection step via Bluetooth again to make sure
that it is connected properly and try again
Read all the instructions and warnings carefully prior to using this product
。Do not store the speaker in a high temperature environment.
。Do not place the speaker near a fire or other excessively hot
environments.
。Do not expose this speaker to moisture or submerge it in liquid. Keep
speaker dry at all times.
。Do not attempt to charge the speaker using any other method or
connection other than the speaker's provided charging cable.
。Do not disassemble this speaker or attempt to repair or modify it in any
manner.
。Be cautious of excessive drops,bumps,abrasions or other impacts to this
speaker.lf there is any damage to the speaker such as dents,punctures,
tears,deformities or corrosion,stop using the speaker and contact us
。If the product produces an abnormal smell,high temperature (low
temperature during normal use) ,discolours or changes shape
abnormally,stop using the product
12367
98 1110
4
5
FCC Caution.
(1)§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
§ 15.21 Changes or modification warning
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of
the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.