Operator`s manual

4.4.7 Module Setup
Select MODULE SETUP>> in SYSTEM SETUP menu. The following menu appears.
Figure 4-13 Module Setup
This menu allows you to enable or disable a parameter module to determine the information
displayed on the main screen. As shown in the figure above, “v” indicates an enabled
module. A module without the “v” mark is disabled and the related waveform and parameter
data disappear from the display.
4.4.8 Trace Setup
Select TRACE SETUP>> in SYSTEM SETUP menu. The following menu appears.
Figure 4-14 Trace Setup
4-14