Operator`s manual

•
ALM REC
ON: The recorder outputs the alarm information in case an
AG alarm occurs.
OFF: The recorder does not output the alarm information in
case an AG alarm occurs.
•
EtCO2 ALM HI
Set the upper limit of EtCO2 which triggers the alarm
•
EtCO2 ALM LO
Set the lower limit of EtCO2 which triggers the alarm
•
FiCO2 ALM HI
Set the upper limit of FiCO2 which triggers the alarm
•
FiCO2 ALM LO
Set the lower limit of FiCO2 which triggers the alarm
•
EtO2 ALM HI
Set the upper limit of EtO2 which triggers the alarm
•
EtO2 ALM LO
Set the lower limit of EtO2 which triggers the alarm
•
FiO2 ALM HI
Set the upper limit of FiO2 which triggers the alarm
•
FiO2 ALM LO Set the lower limit of FiO2 which triggers the alarm If FiO2
is lower than 18%, a high level alarm will be triggered.
•
AWRR ALM HI
Set the upper limit of AwRR which triggers the alarm
•
AWRR ALM LO
Set the lower limit of AwRR which triggers the alarm
Select OTHER SETUP >> in ALARM SETUP menu. The following menu appears.
Figure 18-6 ALARM SETUP menu
In the ALARM SETUP menu-2, you can set the following items.
•
EtN2O ALM HI
Set the upper limit of EtN2O which triggers the alarm
•
EtN2O ALM LO Set the lower limit of EtN2O which triggers the alarm