User's Instructions

10
3. Packing list
Serial
number
Name Function Units Number
1 Host devices Dual band wireless repeater Table 1
2 Ethernet cable Connecting the computer Item 1
3 Certificate Conformity mark PCS 1
4 Instructions
User Instruction
(including warranty card)
Set 1
4. Frequently Asked Questions:
4.1 Q: After configuring the relay successfully, the extended wireless network has
been disconnected and SYS semaphores are not on. How to deal with this?
A: There are two situations that cause this problem:
First, The repeater is too far away from the router and beyond the relay range;
Second, The wrong wireless password was entered while configuring the repeater;
Users can try to take the repeater to the socket near the router and plug it in. If the
SYS signal light is still not on, you need to restore the repeater to the factory settings
(press reset for 6 seconds) and then reconfigure it (the wireless password should be
input correctly when checking the configuration)
4.2 Q: A repeater that is already in normal use, what if you want to replace the main
route?
A: You need to Reset the repeater to factory Settings (long press Reset 6S) and
then reconfigure it.