Dual Band Wireless Repeater User Instructions 1
1. Product Parameters Product Model RA1200 Product Size Dual band Product Type 102*64*40mm Omnidirectional Antenna Direction wireless repeater Installation Direct plug-in Product Color White/black 2.4GHz&5.
Indicator light and interface description The blue light is always on, indicating that the device starts normally. The blue light flashes to indicate that Power LED the device is starting. The blue light is off, indicating that the device is not powered on. A green light flashes, indicating WPS LED negotiation is in progress.
2. Quick Configuration Instructions 2.1 Starting device Insert the repeater into a power outlet near the router and adjust the antenna to the right direction(generally upright and perpendicular to the ground). When the power indicator flashes from the blue light to the normal blue light, the start-up is complete 2.2 Wireless extensions —Repeater Mode Turn on your phone's or computer's WIFI and search for the connection repeater SSID(“WLAN-Repeapter-2.4G/WLAN-Repeater-5G ), The default is no password.
Step3:Enter the router WIFI password/set the expanded wireless name. ① Router WIFI password ② Expanded 2.4Ghz Wireless name ③ Expanded 5.8Ghz wireless name Note: The expanded wireless password is the same as the original router password. If you want to use seamless roaming, please set the expanded SSID to be the same as the main route.
Step4: Confirm extended information. Step5: Observe the STATE of the LED, complete the configuration, and connect the SSID of the repeater again, then you can surf the Internet normally.
2.3 Cable extension—AP Mode Turn on your phone's or computer's WIFI and search for the connection repeater SSID(“WLAN-Repeapter-2.4G/WLAN-Repeater-5G”), The default is no password. After successful connection, open the browser and enter "192.168.99.1" in the address bar to enter the management WEB for quick configuration.
Step3:After the configuration is completed, take a network line to connect therepeater's LAN port to the router's LAN port, and then connect the repeater's SSID again to get online normally.
3. Packing list Serial Name Function Units Number 1 Host devices Dual band wireless repeater Table 1 2 Ethernet cable Connecting the computer Item 1 3 Certificate Conformity mark PCS 1 4 Instructions Set 1 number User Instruction (including warranty card) 4. Frequently Asked Questions: 4.1 Q: After configuring the relay successfully, the extended wireless network has been disconnected and SYS semaphores are not on.
4.3 Q: Other unknown problem that causes the repeater to be unable to use normally, how to deal with? A: You need to Reset the repeater to factory Settings (long press Reset 6S) and then reconfigure it. 4.4 Q: How to operate WPS one-key connection? A: It is required that the router also supports WPS function. After the repeater starts normally, press the WPS button of the repeater first, and the WPS indicator starts flashing.
5. Warranty Terms Warranty Terms Dear customers: Good day！ First of all, thank you for buying our products. Thanks again! In order to facilitate us to provide you with quality and satisfactory after-sales service, but also better protect your rights and interests. Please read this clause carefully. Quality commitment: The company adhering to the "user is God" purpose, to provide customers with quality and satisfactory after-sales service.
replacement or return. Even if the products are within the warranty period, our company will charge relevant maintenance fees. (1) The repaired products have the following phenomena: ■Burn marks ■Defect or damage of components ■Solder defects (2) Operational negligence includes: If the crystal head is connected to the wrong wire, the product is damaged without wearing anti-static bracelet (for bare board), such as chip burning, whole machine damage, shield cover damage, radio frequency head damage, etc.
6. Customer Information Customer Information Customer name Contact number Brand model Postal number MAC number Sales unit Contact number Sale date Postal number Sales address Date Fault description Maintenance Remarks records Remarks: 1. The repair freight shall be paid by both parties, that is, the customer shall be responsible for the return freight, while our company shall be responsible for the delivery freight.
2. If the goods are returned to repair, please give feedback of abnormal quality within 7 days after receiving the products (based on the date of express bill No.), and the overdue goods will not be charged. 3. Please confirm and pay the cost within 7 days. If it is not delivered, our company will be deemed to have abandoned the repair and send it back as it is. Our company will not keep the repaired parts as warehouse.
