User's Manual

3. PC or PDA connect with headset
The bluetooth headset can be also connected with PC or PDA,please refer to your PC or
PDA user manual.
4．Pairing with USB computer bluetooth dongle
(1)、Stereo music play mode:
1).USB dongle insert into computer USB port,put the CDR into computer’s CD
room,setting program,after setting,re-start the computer,then setting successful.
2). Pairing：
First step：Plug the USB dongle into the computer’s USB port
Second step：Headset into pairing status(red& blue lights flashing alternately)
Third step ： Start-up“My bluetooth”in the computer,searching the bluetooth
equipment,then you can find the “Z-B97”in equipment list.
Fourth step: Choose“Z-B97” in the list，input the Pin-Code “0000” in computer.
（Note：“0000” is the fixation pairing Pin-Code for bluetooth headset.）
Fifth step: Pairing successfully, blue light flash slowly(around 1 time per 4 seconds).
Note：
If the bluetooth headset isn’t on pairing status,the USB bluetooth dongle cannot
search the headset.Please set up the headset on pairing status then begin to use the
USB bluetooth dongle to search.
3）.Start-up the headset,after pairing successfully,start-up the computer’s media player to
play musics.
a．Playing music,press S3 to next song.
b．Playing music,press S2 to previous.
c．Playing music,press S1,music stopped,press S1 again,music played.
(2). SKYPE：
1). Start-up the headset,after pairing successfully,start-up SKYPE on computer.
2). Sound communicate function:When the call coming from SKYPE,can hear
“Di…”sound in the headset→press S1 to answer the phone(or press the answer key on
SKYPE directly) →Enter into communicate status.
3）．Finish /Refuse the call：
After communicate on SKYPE→press S1 to finish the call(or press the finish key on
SKYPE directly).
4) When the call coming from SKYPE，if you don’t want to answer the phone,you can
press the refuse key on SKYPE directly.
5）．After finish the call,the headset can automatically enter into the stereo mode to enjoy
the musics.
(3). QQ：
1）．Start-up the headset,after pairing successfully,start-up QQ on computer.
2）．QQ setup：press the audio setup,choose the input and output to “bluetooth audio”
→Finish.