User's Manual

pairing unsuccessfully, its' need to re- pairing.
Note:
If headset cannot find the pairing equipment in 3 minutes will automatically shutdown.
If headset isn’t in pairing status,your mobile and other bluetooth equipments cannot search
headset,please set the headset on pairing status then your mobile can begin to search.
4. Start-up & Shutdown
1. Start-up headset
Shutdown status: Press S1 key for 5 seconds→red & blue lights flash →headset with
“bi,bi...”sound→ stop press S1 key→start-up headset successfully, begin to connecting
mode→automatic search has been paired device→connected to stereo while the blue light
flash once per second. If not connected, then enter into the standby mode, the red light
flashes continuously, 3 minutes later will automatically shutdown.
2. Shutdown headset
1）Start-up status: Press S1 key for 3 seconds→red & blue lights flash quickly for one
time→headset with “de”sound→shutdown.
2）When Searching the equipment or without the receive range of headset, it will
automatically shutdown after not get any connection in 3 minutes.
Wireless status indicator:
Battery status
D. Basic Use Method
Dial，Talk & Finish calls
After the bluetooth headset finish pairing with your mobile,you can use the headset to
answer the phone or enjoy the mobile stereo music.
1. Mobile dial,talk and finish calls
Dial a call
Dial-up using the phone's keypad
1).Using your phone, dial numbers as usual in the same manner, during connecting ,
Blue light flash slowly Bluetooth:Connection has been established, the
headset can start operating.
Red&blue light flash
alternately
Bluetooth: Quickly flashing indicate the headset can be
connected, but not connected.
No indicator Power off
Indicator Battery Note
Red light flash
with alarm
<10% Left less than 30 minutes using time
Stable red light Charging
Stable blue light Finish charging