User's Manual

5
3）.Start-up the headset,after pairing successfully,start-up the computer’s media player to play musics.
a．Playing music,press S3 to next song.
b．Playing music,press S2 to previous.
c．Playing music,press S1,music stopped,press S1 again,music played.
2). SKYPE：
1). Start-up the headset,after pairing successfully,start-up SKYPE on computer.
2).Sound communicate function:When the call coming from SKYPE,can hear “Di…”sound in the
headset→press S1 to answer the phone(or press the answer key on SKYPE directly) →Enter into
communicate status.
3).Finish /Refuse the call：
After communicate on SKYPE→press S1 to finish the call(or press the finish key on SKYPE directly).
4). When the call coming from SKYPE，if you don’t want to answer the phone,you can press the refuse
key on SKYPE directly.
5).After finish the call,the headset can automatically enter into the stereo mode to enjoy the musics.
(3). QQ：
1）．Start-up the headset,after pairing successfully,start-up QQ on computer.
2）．QQ setup：press the audio setup,choose the input and output to “bluetooth audio” →Finish.
3)．Dial number function: this operation can be only progress on QQ by mouse.
4)．Answer the phone：During the call coming from QQ，you can hear “Di…”sound in the headset,press
the answer key on QQ by mouse→Enter into communicate status.
5)．Finish /Refuse the call：
a.After communicate on QQ→ press the finish key on QQ directly
b. When the call coming from QQ，if you don’t want to answer the phone,you can press the refuse key
on QQ directly.
6)．After finish the call,the headset can automatically enter into the stereo mode to enjoy the music.
Note:
a.when using the headset with the internet for long-distance call, the bluetooth adapter driver software is
different ,the operation ways are also different.
b.when using the headset with the internet for long-distance call ,if it’s a silent call, please set the audio
input and output of the conversation tool in Bluetooth status.
E. FAQ
1. Red light flashes quickly,and "di di.."sound in the headset.
→The bluetooth headset is low power,please charge it as quick as possible.
2. The headset can not be start-up after charge for 20 minutes.
→The bluetooth headset need to be charged for 40 minutes at least for start-up,suggest to charge
enough power consumingly before using.
3.No indication during charge
If the battery was used out of power completely or didn’t use for long time,when you use at the first
time,may be no indication light,but need to wait for a few minutes,then blue light will be flash for
charge indication, after full charged,the blue light is brighten.