User's Manual

a.The mobile ringing→press shortly the S1 key or press the receiver key on mobile→ blue light

flashes 2 times per second. If need to hang up, press S1 key once.

b.Call: Press shortly the S3 key,go to the mobile phone, and then press the S3 key again to answer

the call. (Some phones may not support this feature, the call forwarding can not be completed)

c.When call coming, if you want to refuse, you can press S1 key twice shortly.

d.During talking,press S4 key,volume +,press S5 key,volume -. Press long time ,can control the

Volume（from low to high total 15 levels,you can hear “Bi ,Bi”when on low or on hight）.

e． Press S1 key shortly,off key on mobile or the order side hang up the call to finish calls, after finish,

blue light flash four times per second.

Speaker silent(phone state)

During the calling, if you need to talk with other people around you, but don't want to hang up, and

also don't want the other side hear the conversation, you can press S2 key, after you hear beep sound in

the headset, you can talk with other people around you safely, no need to worry about the conversation

be heard by the other side.Re-press S2 key shortly, to restore speaker calling function.

2. Mobile Stereo Music Play Mode(default state after connected with bluetooth headset)

Need the pairing mobile phone support stereo music playing.

a．Playing music, press S3 key quickly to Backward.

b．Playing music, press S2 key quickly to Upward.

c．Playing music, press S1 PLAY key quickly,music stops.Press S1 PLAY key quickly,music playing.

Note：Base on different design for different mobiles,during the headset stand-by mode,the bluetooth

connection may be automatically cut off.

3. PC or PDA connect with headset

The bluetooth headset can be also connected with PC or PDA,please refer to your PC or PDA user

manual.

4．Pairing with USB computer bluetooth dongle

(1)、Stereo music play mode:

1).USB dongle insert into computer USB port,put the CDR into computer’s CD room,setting

program,after setting,re-start the computer,then setting successful.

2). Pairing：

First step：Plug the USB dongle into the computer’s USB port

Second step：Headset into pairing status(red& blue lights flashing alternately)

Third step:Start-up“My bluetooth”in the computer,searching the bluetooth equipment,then you can find

the “Z-B96”in equipment list.

Fourth step: Choose“Z-B96” in the list，input the Pin-Code “0000” in computer.

（Note：“0000” is the fixation pairing Pin-Code for bluetooth headset.）

Fifth step: Pairing successfully, blue light flash slowly(around 1 time per 4 seconds).

Note：

If the bluetooth headset isn’t on pairing status,the USB bluetooth dongle cannot search the

headset.Please set up the headset on pairing status then begin to use the USB bluetooth dongle to

search.