User's Manual

3
stop press S1 key→start-up headset successfully, begin to connecting mode→automatic search has
been paired device→connected to stereo while the blue light flash once per second. If not connected,
then enter into the standby mode, the red light flashes continuously, 3 minutes later will automatically
shutdown.
2. Shutdown headset
1）Start-up status: Press S1 key for 3 seconds→red & blue lights flash quickly for one time→headset with
“de”sound→shutdown.
2）When Searching the equipment or without the receive range of headset, it will automatically shutdown
after not get any connection in 3 minutes.
Wireless status indicator:
Battery status
D.
Ba
sic
Us
e Method
Dial，Talk & Finish calls
After the bluetooth headset finish pairing with your mobile,you can use the headset to answer the
phone or enjoy the mobile stereo music.
1. Mobile dial,talk and finish calls
Dial a call
Dial-up using the phone's keypad
1).Using your phone, dial numbers as usual in the same manner, during connecting , headphones with
vibration ring tones. When getting calls, sound will be automatic in the Bluetooth headset, after getting
the calls,the blue light flash 2 times per second. If you want to hang up, just press S1 key once.
2).Press the S1 key twice, can automatic to dial the telephone No. last time,when getting call,sound will
be automatic in the bluetooth headset,after getting the calls,the blue flash 2 times per second.If you
want to hang up, just press S1 key once.
Talk & finish calls
When the calls comes,you can hear the alarm sound“Di,Di....”，the headset red light keep lighting.
Blue light flash slowly Bluetooth:Connection has been established, the headset
can start operating.
Red&blue light flash alternately Bluetooth: Quickly flashing indicate the headset can be
connected, but not connected.
No indicator Power off
Indicator Battery Note
Red light flash with alarm <10% Left less than 30 minutes using time
Stable red light Charging
Stable blue light Finish charging