User's Manual

2
S4. Volume “+”
S5.Volume “-”
LED: work indicator
（3）Connect to bluetooth device
Z-B96 should be paired to mobile phone(or other Bluetooth devices) before operating.
(1).First step:
Shutdown status: Press S1 key for 5 seconds→red & blue lights flash twice at the same time→
headset with"de" sound→ red & blue lights start flashing alternately, →headset with “bi,bi...”sound→enter
into pairing status.
2).Second step:
Begin to pairing on your mobile(Please refer to mobile user manual).After searching you will get
“Z-B97” in your mobile equipment list.
3).Third step:
You will be required to enter Pin-Code→Password 0000 is needed to enter→Pairing successfully.
(Note: 0000 is a default pairing Pin-Code for bluetooth headset, some mobile phones support simple
pairing do not need to enter Pin-Code, now most of the new mobile phones are support simple pairing)
4).Fourth step:
Pairing successfully→headset with “bi,bi...”sound→ blue light flash per 4 seconds. If pairing
unsuccessfully, its' need to re- pairing.
Note:
If headset cannot find the pairing equipment in 3 minutes will automatically shutdown.
If headset isn’t in pairing status,your mobile and other bluetooth equipments cannot search
headset,please set the headset on pairing status then your mobile can begin to search.
4. Start-up & Shutdown
1. Start-up headset
Shutdown status: Press S1 key for 5 seconds→red & blue lights flash →headset with “bi,bi...”sound→