User's Manual

to pair. If select headset service, to accept connection by press on/off button after headset issue a
beep with red&green light flashing together.If select audio service,no need to press button but
connect automatically.
6.After pairing successfully,the green light in headset will be flash, you can enjoy the computer's
music or voice chatting then.
Remark: a.Base on different design for different computer or TVT edition, the connection and
function will be different.
b.When using TVT software to connect Bluetooth,please select right Bluetooth service,
forbid to connect audio and headset at the same time, Otherwise may cause problems such as silent
call.
H. Low power alarm: As the battery voltage is lower than 3.3 V,the red light will flash twice
rapidly every 30 seconds,and issue a beep,as the battery voltage is lower than 3.0V,the headset will
shut-off automatically,please charge it as quick as possible.
I: Off automatically: Headset will automatically shut-off after no pairing for 3 minutes.
J. Resetting: If the headset can not turn off, can be reset to normal condition by charging.
K. Important information：
1.Can not start or shut-down automatically after start: The bluetooth headset is low power,please
charge it as quick as possible.
2.Can’t find Bluetooth equipment or paring:
a. Please put headset and other paring equipments in 5 meters,no big barrier between the two
pairing equipments.
b. Make sure the headset is in pairing status. Mobile/computer and other Bluetooth equipments
are in searching status.
c.Delete all the history paired Bluetooth equipments in mobile or computer, restart the
mobile/computer and pairing.
3, Pairing successfully,but no sound in the headset