User's Manual

S3.Next button: Play next (stereo status), Mobile/Bluetooth switch( phone state)

S4. Volume “+”

S5.Volume “-”

S6: Pause/ Play button (stereo condition)

LED: Work Indicator

3．Connect to bluetooth device

Z-B80 should be paired to mobile phone(or other Bluetooth devices) before using.

1).First step:

Shutdown status: press S1 and hold for 5 seconds→red & blue light will flash twice at the same

time→ headset with"de" sound→ red & blue lights start flashing alternately, →headset with

“bi,bi...”sound→enter into pairing status.

2).Second step:

While in paring mode, search for “Z-B80” on your bluetooth device.

3).Third step:

You will be required to enter pin-code→password 0000 is needed to enter→pairing successfully.

(Note: 0000 is a default pairing Pin-Code for bluetooth headset, some mobile phones support

simple pairing do not need to enter Pin-Code, now most of the new mobile phones are support

simple pairing).

4).Fourth step:

Pairing successfully→headset with “bi,bi...”sound→ blue LED will blink slowly per 4 seconds

when connected to bluetooth device ,If pairing unsuccessfully, its' need to re- pairing.

Note:

If headset cannot find the pairing equipment within 3 minutes,it will automatically shutdown.

If headset isn’t in pairing status,your mobile and other bluetooth equipments cannot search

headset,please set the headset on pairing status then your mobile can begin to search.

4. Start-up & Shutdown

(1)Start-up headset

Shutdown status:press S1 and hold for 5 seconds→blue light will flash 3 times →headset with

“bi,bi...”sound→ stop press S1 button→start-up headset successfully, begin to connecting

mode→automatic search paired device→after finish pairing,the blue light will flash per 4 seconds. If not

connected, then enter into the standby mode, the red light flashes continuously, 3 minutes later will

automatically shutdown.

(2) Shutdown headset

1 ） Start-up status: Press S1and hold for 3 seconds→red light will flash quickly two

times→headset with “de”sound→shutdown.

）When searching condition or out of the valid receiving range of headset, it will automatically

shutdown after no device can be found within 3 minutes.

Wireless status indicator: