User's Manual

then switch off.
12. Switch on automatically reconnect: Long press multifunctional button under the
shutdown status,release the button after the blue light flash ( please don't press until blue&red
flash alternately), the headset will automatically connected with the mobile which paried with it
before.
13.Break to reconnect: While the headset and mobile disconnected,the headset is enter into
disconnect standby status, the red light in headset will flash, if press the multifunctional button
shortly, the headset will automatically connected with the history paired equipments.
Remark: Different kinds of mobile, the way for connecting with the bluetooth headset and
function will be different.
VII. Introduction of bluetooth headset pairing with computer
There are two kinds of situation for Bluetooth connects with computer:
a.The computer is built in bluetooth,can use bluetooth software to connect
b, The computer does not have bluetooth, needs to insert USB bluetooth dongle and installs
IVT bluetooth drive software. Below is the operate instruction for connecting by USB bluetooth
dongle
1.Install the IVT bluetooth drive software
2.Insert the USB dongle into computer USB port ( better to insert into the USB port at the front
of computer )
3.Swith on the headset into pairing status.
4.Start-up IVT Bluetooth drive software in the computer,click " Refresh Equipment" in "View
Menu",begin to search the bluetooth equipment.
5, After searching,then you can find the "B30"in equipment list,choose"B30" in the list, click
right mouse button,click"connection",then appeared two options: a,Bluetooth high quality audio
service( used for enjoy music) b, Bluetooth headset service (used for internet call ), after selecting
the service needed,the computer will required to input pairing code,please input the Pin-Code
“0000” to pair. If select headset service, to accept connection by press multifunctional button
when the headset issue a beep with red&blue light flashing together.If select audio service,no need
to press button but connect automatically.
6. After pairing successfully,the blue light in headset will be flash, you can enjoy the computer's
music or voice chatting
Remark: a.Different kinds of computer or IVT edition, the way for connecting with the
bluetooth headset and function will be different.
b.When using IVT software to connect Bluetooth,please select right Bluetooth