User's Manual

-68-
[Name] Turn underline mode on/off for Kanji characters
[Format] ASCII FS - n
Hex 1C 2D n
Decimal 28 45 n
[Range] 0 ≤ n ≤ 2, 48 ≤ n ≤ 50
[Description] Turns underline mode for Kanji characters on or off, based on the following values of n.
n Function
0, 48 Turns off underline mode for Kanji characters
1, 49 Turns on underline mode for Kanji characters (1-dot thick)
2, 50 Turns on underline mode for Kanji characters (2-dot thick)
[Details] • The printer can underline all characters (including right- and left-side character
spacing), but cannot underline the space set by HT and 90° clockwise-rotated
characters.
• After the underline mode for Kanji characters is turned off by setting n to 0,
underline printing is no longer performed, but the previously specified underline
thickness is not changed. The default underline thickness is 1 dot.
• The specified line thickness does not change even when the character size
changes.
• It is possible to turn underline mode on or off using FS !, and the last received
command is effective.
[Default] n = 0
[Reference] FS !
FS .
[Name] Cancel Kanji character mode
[Format] ASCII FS .
Hex 1C 2E
Decimal 28 46
[Description] Cancels Kanji character mode.
[Reference] FS &, FS C
FS 2 c1 c2 d1...dk
[Name] Define user-defined Kanji characters
[Format] ASCII FS 2 c1 c2 d1...dk
Hex 1C 32 c1 c2 d1...dk
Decimal 28 50 c1 c2 d1...dk
[Range] c1 and c2 indicate character codes for the defined characters. The range of
values for c1 and c2 differ depending on the character code system used.
0 ≤ d ≤ 255
Model type c1 c2
Japanese Kanji ZJporting model
(JIS code system)
c1 = 77H 21H ≤ c2 ≤ 7EH
Japanese Kanji ZJporting model
(SHIFT-JIS code system)
c1 = ECH 40H ≤ c2 ≤ 7EH
80H ≤ c2 ≤ 9EH
Chinese Kanji ZJporting model c1 = FEH A1H ≤ c2 ≤ FEH
Taiwanese Kanji ZJporting model c1 = FEH A1H≤ c2 ≤ FEH