User's Manual

-63-
6 CODABAR 1 ≤ k ≤ 255
48 ≤ d ≤ 57,
65 ≤ d ≤ 68,
d = 36, 43, 45, 46,
47, 58
65 UPC-A 11 ≤ n ≤ 12 48 ≤ d ≤ 57
66 UPC-E 11 ≤ n ≤ 12 48 ≤ d ≤ 57
67 JAN13 (EAN13) 12 ≤ n ≤ 13 48 ≤ d ≤ 57
68 JAN8 (EAN8) 7 ≤ n ≤ 8 48 ≤ d ≤ 57
69
CODE39
1 ≤ n ≤ 255
45 ≤ d ≤ 57，
65 ≤ d ≤ 90，
d = 32, 36, 37, 43, 45,
46, 47
d = 42
70 ITF 1 ≤ n ≤ 255（even number） 48 ≤ d ≤ 57
71 CODABAR 1 ≤ n ≤ 255 48 ≤ d ≤ 57,
65 ≤ d ≤ 68,
d = 36, 43, 45, 46,
47, 58
72 CODE93 1 ≤ n ≤ 255 0 ≤ d ≤ 127
②
73 CODE128 2 ≤ n ≤ 255 0 ≤ d ≤ 127
[Details for ①]
. This command ends with a NUL code.
. When the bar code system used is UPC-A or UPC-E, the printer prints the bar code data
after
receiving 12 bytes bar code data and processes the following data as normal data.
. When the bar code system used is JAN13 (EAN13), the printer prints the bar code after
receiving 13 bytes bar code data and processes the following data as normal data.
. When the bar code system used is JAN8 (EAN8), the printer prints the bar code after
receiving 8 bytes bar code data and processes the following data as normal data.
. The number of data for ITF bar code must be even numbers. When an odd number of
data
is input, the printer ignores the last received data.
[Details for ②]
. n indicates the number of bar code data, and the printer processes n bytes from the next
character data as bar code data.
. If n is outside of the specified range, the printer stops command processing and
processes
the following data as normal data.
[Details in standard mode]
. If d is outside of the specified range, the printer only feeds paper and processes the
following
data as normal data.
. If the horizontal size exceeds printing area, the printer only feeds the paper.
. This command feeds as much paper as is required to print the bar code, regardless of