User's Manual

-51-
Therefore, it is recommended to write the NV memory 10 times or less a day.
· The printer performs a hardware reset after the procedure to place the image into
the NV memory. Therefore, user-defined characters, downloaded bit images, and
macros should be defined only after completing this command. The printer clears
the receive and print buffers and resets the mode to the mode that was in effect at
power on. At this time, DIP switch settings are checked again.
[Reference] FS p
GS ! n (*
)
[Name] Select character size
[Format] ASCII GS ! n
Hex 1D 21 n
Decimal 29 33 n
[Range] 0 £ n £ 255
(1 £ vertical number of times £ 8, 1 £ horizontal number of times £ 8)