User's Manual

-40-
9 Norway
10 Denmark
11 Spain
12 Latin
13 Korea
14 Slovenia/Croatia
15 Chinese
The character sets for Slovenia/Croatia and China are ZJported only in the Simplified
Chinese model.
[Default] Simplified Chinese model: n = 15
Models other than the Simplified Chinese model: n = 0
ESC S (*)
[Name] Select standard mode
[Format] ASCII ESC S
Hex 1B 53
Decimal 27 83
[Description] Switches from page mode to standard mode.
[Details] · This command is effective only in page mode.
· Data buffered in page mode are cleared.
· This command sets the print position to the beginning of the line.
· The printing area set by ESC W are initialized.
· This command switches the settings for the following commands (in which the
values can be set independently in standard mode and page mode) to those for
standard mode:
①Set right-side character spacing: ESC SP, FS S
② Select default line spacing: ESC 2, ESC 3
· The following commands are enabled only to set in standard mode.
① Set printing area in page mode: ESC W
② Select print direction in page mode: ESC T
· The following commands are ignored in standard mode.
① Set absolute vertical print position in page mode: GS $
② Set relative vertical print position in page mode: GS \
· Standard mode is selected automatically when power is turned on, the printer is
reset, or command ESC @ is used.
[Reference] FF, ESC FF, ESC L
ESC T n (*
)
[Name] Select print direction in page mode
[Format] ASCII ESC T n
Hex 1B 54 n
Decimal 27 84 n
[Range] 0 £ n £ 3