User's Manual

-13-
4. Installing Wizard
Installing Wizard
(Only for Bluetooth Interface)
Step1: Make sure your device (like PC, Note Book) has Bluetooth function, then once
the Bluetooth for your device is activated, you will see the Bluetooth sign showed
in the right bottom side of your device(like PC) screen.
Step2:Power on the Bluetooth printer.
Step3:To add the Bluetooth printer, please left-click the àclick “Add a Bluetooth
Device” ,then you will enter wizard screen , please choose “My device is set up
according and ready to be found”àclick “Next”
(showed as below).