User's Manual

Step 1: Prepare
1. After long-time transportation, the battery level of the camera may decrease.
Please charge the camera via a 5V charger or a computer USB interface before
using it. When in charging, the LED indicator on the camera is red.
2. After the camera is fully charged, power it on. After the LED indicator close to
its lens is lit, press the reset button for 8 seconds. A prompt tone suggests
successful reset.
3. Enter the setting interface of your mobile phone and click the WiFi of your
home in the WiFi list.
Step 2: Connect the camera.
1. Enter “UBox APP”, click “Add a device” to enter the device list (Fig. 3).
Choose “Setup WiFi Device” (Fig. 4).
2. Check whether the LED indicator close to the lens is flashing. If it is, click
“Yes” to enter the device information interface (Fig. 5).
3. Set name of the camera, or use its default name and then click “Next” (Fig. 6).
III. Camera connection
Please realize access to videos by scanning the following QR code with your
mobile phone or through the following link.
-03-
How to set up wifi through scanning
QR code for S50
How to set up WIFI via sound
wave pairing for S50
https://youtu.be/9Xbw-_dIBv0 https://youtu.be/DsixI0dSako