Product Description

2. Pull out the doorbell forward; as shown ;
1. Insert the disassembly needle into the hole and press down firmly;
as shown ;
Disassembling the doorbell
charging instructions
Base station connection Doorbell network access settings
Preparation for use
9 1076 8
1
2
* Requires a wireless router connected to the Internet; requires at least
2MB of uplink network.
Connect your
phone to Wi-Fi
Smart Phone Wi-Fi wireless
router LAN
Wi-Fi Cable
Based station
Power outlet
1
2
1
2
2
2
1
Smart LifeTuya Smart
3. Plug in the USB cable to charge.
1
When you get this product, please turn on the device first;use the
configured power cord to fully charge the device;
At the same time, make sure that the phone is connected to
a Wi-Fi network in the 2.4GHz frequency band.
Download and open the App;
Search for "Tuya Smart" or "Smart Life" in the app store or scan the
Download and install the App by QR code;
For the first download and use, please click the "register" button to
register an account; if you already have an account, click
“Login” button.
(If you do not purchase a base station, this step can be ignored)
Base station network access settings
(If you do not purchase a base station, this step can be ignored)
Dingdong machine pairing
(If you do not purchase Dingdong, this step can be ignored)
Use a network cable to connect the base station to the LAN
interface of the wireless router;
The red light of the indicator light is always on. After the startup is
completed, the base station enters the state of waiting for network
configuration, and the red light of the indicator flashes.
Add base station
Open the Tuya Smart App and click the add button "+" in the upper
right corner of the page.
Follow the instructions of the program to complete the addition of
the base station.
Add camera
Enter the base station page, click the add sub-device button below,
the base station enters the state of adding sub-devices, referring to
Indicator light The green light starts to flash;
Press the camera switch/distribution button, the device is turned
on and enters the state of waiting for network configuration,
you will listen When the network prompt sound is reached, the
red light starts to flash at the same time;
You will hear the prompt tone of successful network configuration,
the successfully added sub-device appears on the program, and the
camera The upper indicator light turns green.
Open the "Home" of the Tuya
Smart App,
Click the add button "+" in the
upper right corner of the page;
In the "Add Device" page,
select "Add";
Click "Next"; The connection is successful.
The device is connecting,
waiting to connect;
Enter the connected WiFi
password and click "Next";
Please power on the Dingdong machine first;
Press the doorbell button to pair, the Dingdong machine will send
out "Dingdong", and the indicator light will go out, the Dingdong
machine is paired successfully.
Long press the reset button for 5 seconds, the indicator light of the
Dingdong machine flashes slowly, and the Dingdong machine sends
out "Ding ding ding ding dong", Dingdong The machine enters the
pairing state;