User's Manual

Stylus Pen
Charging box
Type-c
Indicator
Light
Magnetic
Adsorption
Charge
Sensing
2. The other end of Type -C charging
line is connected to the charging box .
When the green indicator light is on,
the stylus supporting wireless charging
will be attached to the slot of the charg
ing box. The red indicator light will
always be on during charging, and
the green indicator light w i l l flas h
when the battery is fully charged;
Indicator Description
1. Use the Type- C charging wire USB
terminal to connec t thecomputer ,
mobile phone charger or mobile
power supply.It is recommended
to use a 5V
/
1A adapter to avoid the
use of super power fast charging
adapter to avoid damage;
Instructions
Product Structure
Standby
Charging
Fully charged
Green light
Red light
Green light flashing
Product Parameters
Product name
Product color
Product material
Product size
input parameter
Output parameters
Stylus charging box
silvery
aluminium alloy
190*30*10mm
DC5V， ≤3A
DC5V， ≤200mA
Product Features
User' s Manual
Note: Only the stylus with wireless
charging function is supported
Magnetic
Adsorption
Note: the product appearance shall be
subject to the actual object
1. It is suitable for charging the Apple pencil
(2nd generation) stylus, so as to reduce the
loss of the battery power of the iPad;
2. The product chip has built-in voltage, current
and short circuit protection to prevent the
adapter from overcharging the pencil and
protect your iPad pencil battery;
3. Aluminum alloy CNC integrated molding
design , fashionable and simple , solid and
durable;
4. Put the stylus close to the charging box at
will, then the stylus can be stored by magnetic
adsorption, and quickly conduct non inductive
charging;
45mm
150 mm
List of accessories
Charging box * 1
USB-Type-C cable * 1
Instruction manual * 1
Touch pen case * 1
FCC S
tatement
This equipment has been
tested and found to
comply with the limits for
a Class B digital device,
pursuant to part 15 of the
FCC Rules. These limits
are designed to provide
reasonable protection
against harmful
interference in a
residential installation.
This equipment
generates, uses and can
radiate radio frequency
energy and, if not
installed and used in
accordance with the
instructions, may cause
harmful interference to
radio communications.
However, there is no
guarantee that
interference will not occur
in a particular installation.
If this equipment does
cause harmful
interference to radio or
television reception,
which can be determined
by turning the equipment
off and on, the user is
encouraged to try to
correct the interference
by one or more of the
following measures:
• Reorient or
relocate the receiving
antenna.
• Increase the
separation between the
equipment and receiver.
5
• Connect the
equipment into an outlet
on a circuit different from
that to which the receiver
is c
onnected.
• Consult the
dealer or an experienced
radio/TV technician for
help.
Caution: Any changes or
modifications to this
device not explicitly
approved by manufacturer
could void your authority
to operate this equipment.
This device complies with
part 15 of the FCC Rules.
Operation is subject to
the following two
conditions: (1) This
device may not cause
harmful interference, and
(2) this device must
accept any interference
received, including
interference that may
cause undesired
operation.
RF Exposure Information
This equipment complies
with FCC radiation
exposure limits set forth
for an uncontrolled
environment. This
equipment should be
installed and operated
with minimum distance
15/20cm between the
radiator and your body.
6