Specifications

Introduction
Operations
Buttons and controls
Package Content
Specifications
Thank you for purchasing the M2 Wireless Speaker. We advise
you to read, follow and keep the following instructions in order
to be able to correctly set up the speaker and enjoy all its
features to the fullest.
1. When the speaker indicates “Low battery”, the volume will be
turned down automatically to save power. At that time, please
charge the speaker ASAP.
2. While charging the speaker, please do not use the AUX cable
to connect computer at the same time.
3. Charging time: About 4.5 hours to fully charge the speaker.
Note: While charging, it is normal that the speaker gets hot.
Please don't worry.
Do NOT drop, hit or shake the device.
Do NOT disassemble, repair or modify the speaker.
Do NOT cleaning stuff that contains benzene, solvents or
alcohol.
Do NOT expose the speaker to excessive heat or direct sunlight
for prolonged periods of time.
Do NOT store the device in a place with high humidity.
1. Make sure that your device is within 1 meter from the speaker.
1. Card capacity: 32G or below.
2. Support files: mp3, flac, wav.
Full light on
light off
2. Clear the Bluetooth pairing list on your device.
3. Make sure the speaker has entered the “Bluetooth Mode”
rather than “AUX in Mode”or “TF card Mode”
4. Try to reset your device.
5. Try the pairing steps above again.
1*M2 Wireless Speaker
1*Micro USB charging cable
1*3.5mm AUX cable
1*User Mannual
Model/Bluetooth Name: M2
Speaker: 52mm Internal magnetic 4R 5W
Battery: 1800mAh 3.7V
Output: 5W@1% THD+N
Input: 5V/1A
Weight: 224g
Bluetooth Range: 10m/33ft
TWS indicator
Pair the speaker with your smartphone
Have connecting problem?
Pair the speaker with your computer
AUX in Mode
Play music via TF card Mode
Warnings
Charge the speaker
Trouble Shooting
Hands-free Calling
Party Light Control / TWS Connect
Playing Time
Bluetooth indicator/
charging indicator
Charging port
AUX in port
TF card jack
Tap Press and
h
old
Double-
Clic k
Tap
Press and
hold
Double-
Clic k
Tap
Press and
hold
Double-
Clic k
Play/
Pause
Power on/
off
switch
speaker
to silent
Power on/
off
Play/
Pause
Power
on/off
/
Volume + Next Song Volume + Volume + Volume +
Next
Song
/
Volume -
Previous
Song
Volume - Volume - Volume -
Previous
Song
/
/
/
/
/ /
/
/
/
/
/
/
/
/
/
Bluetooth Mode AUX in Mode TF Card ModeBut tons
M
ode
Indicators View Indicator State System State
Flashing white
The speaker has entered into TWS Mode and it is ready to be paired
TWS connected
Charging
Fully charged
Waiting for bluetooth pairing
Device is paired
Steady white
Flashing white
Steady white
Flashing white
Steady white
TWS Indicator
Charging Indicator
Bluetooth Indicator
Switch
mode（
Bluetooth
Mode/AU
X in
Mode/TF
card
Mode）
An-
swer/End
a call
Turn
on/off the
light
Start/End
the TWS
Connect-
ed
Clear
the
TWS
paired
devices
Turn
on/off the
light
Start/End
the TWS
Connect-
ed
Turn
on/off
the light
Cut off
bluetooth
connect-
ed/Reject
a call
Switch
mode（
Bluetooth
Mode/AUX
in
Mode/TF
card Mode
）
Switch
mode（
Blue-
tooth
Mode/A
UX in
Mode/T
F card
Mode）
1. Turn on the M2 Bluetooth Speaker
2. Turn on the Bluetooth on your computer, then pair "M2".
Have connecting problem?
1. Make sure that your device is within 1 meter from the speaker.
2. Clear the Bluetooth pairing list on your device.
3. Make sure the speaker has entered the “Bluetooth Mode” rather
than “AUX in Mode”or “TF card Mode”
4. Try to reset your computer.
5. Please make sure that your computer setting
6. Try the pairing steps above again.
Auto-off Timer
The auto-off timer conserves the battery when the speaker is
operating on battery power.
In bluetooth mode, the speaker switches off automatically when
the bluetooth device has disconnected and buttons have not been
pressed for 20 minutes.
In AUX in mode and TF card mode, the speaker switches off when
audio has stopped and buttons have not been pressed for 20
minutes.
The party light do not changed by the beat?
Please turn up the volume on the speaker and your device.
Note：In AUX-in mode, the bluetooth speaker cannot answer the
phone call.
Problems Solutions
No power
B
attery may be in protection mode or drained. Plug in and
c
harge the speaker.
Battery cannot be charged
1
.Make sure you are using a USB cable from a qualified
m
anufacturer.
2
.Please use a adapter to charge the speaker, do not use
c
omputer USB port or other.
3
.Try to use a different USB cable.
No sound
1
.Turn off the bluetooth on your device. Remove the speake
r
f
rom the bluetooth list and then try to pair your device again.
2
.Increase the volume on the speaker and your device.
3
.Make sure that you are using the correct device.
4
.Use a different music source.
5
.Try to pair a different device.
No sound when in aux-in mode
1
.Make sure the device connected to your speaker is turned
o
n and playing music.
2
.Increase the volume on the speaker and your device.
3
.Make sure the device is properly connected.
4
.Try to use a different cable.
5
.Try to connect a different device.
Poor sound quality/buzzing sound
1
.Try to use a different music sources.
2
.Increse the volume on speaker and device.
3
.Check the device's audio settings.
4.Charge the speaker until fully charged.
6