User's Manual

4.TROUBLE SHOOTING for first connection
Solution 1:
When your controller has been connected,please just press[A Button] one time to confirm.
 If you press two times [A button],controller connected will be disconnected.

[Change Grip/Order]means disconnect all the controllers that has been connected
(1) (2)
 After you connected your controller and return to this step,
 please DO NOT press[A button] again,you can press[B button] or [HOME button]
Solution 2:
because Bluetooth pairing problems between NS Switch and controller,if you can’t finish the first
connection,please restart your NS Switch as below and try again.
 Hold the power button located on the top of the Switch for around 5 seconds
 Under sleep mode,you will see “power Options”

Under Power Option,you can choose to restart or turn the power off
5.How to wake up your conntroller
 When controller is in the sleep mode,you should wake up your controller with short press
[A,B,X,Y Button],LED channel light 1-4 will blink
6.Automatic power off & Sleep Function
Status Operation
When connecting the
switch for the first time
If the first connection can’t be completed,after 6O
seconds,controller will automatic shutdown.
When the controller is
connected
It will sleep in accordance with the host system's
sleep settings, the host screen is closed, and the
handle is automatically dormant.