ZP-THP60-Gamma4A PRODUCT INFORMATION GUIDE 1
PRODUCT OVERVIEW 01 01. Pogo-pin for charging 02. Adaptive design headband 03. Mirco USB cable for charging 04. RCA to 3.5mm cable 05. Soft Ear cushion 06. Wireless Transmitter&charging baser 07.
PRODUCT OVERVIEW 08. Connect LED indicator（Base station） 09. Charging LED indicator(Base station) 10. Pogo-pin for charging(Headphone) 11. 3.5mm input for wired use 12. Bulid-in mic(optional) 13. Micro-USB for charging(Headphone) 14. LED Indicator(Headphone) 15. Volume down 16. Mute 17. Power 18. Volume up 19. Power switch(Base station) 20. Micro-USB for power 21. Audio source switch(Optical/3.5mm) 22. 3.5mm input 23.
SETUP 1.Use the Micro-USB cable to connect Adapter and Base station for power up 2.Power up the headphone,and will see the LED indicator on headphone and Base station turn to solid Blue 3.5mm Audio source 1. Use the RCA to 3.5mm cable connect your TV(RCA output Jack/headphone jack) to Base station(3.5mm Input jack) 2. You can also use 3.5mm to 3.
CHARGING 1. You can hang the headphone to the base station for charging, make sure that the headphone and the base are in correct contact, and the charging indicator light is on. You can also charge the headset to use the micro-USB cable to the charging port on the headset, and plug the other end into any USB power source(5V/1A) 2. LED indicator will Red when charging, will off when charging full.
POWER ON/OFF To power on the headset press and hold the power button for at least 3 seconds. The LED indicator will Blue. To power off the headset press and hold the power button for at least 3 seconds. The LED indicator will off.
PAIRING • Press and hold the headset microphone mute button for 3 seconds at same time, you will see the LED indicator blue blinking • Press and hold the transmitter pairing button for 3 seconds until the LED indicator blue blinking rapidly • Pairing will be completed automatically, and there is no need to pair again for use The headset is already paired to the transmitter when it arrives.
OTHER CONNECT FOR WIRELESS AUDIO NOT INCLUDE 3.5mm TO 3.5mm CABLE You can also use the 3.5mm to 3.
Connect To TV RCA/3.
Connect To SoundBar/Other Audio equipment SOUNDBAR OR OTHER AUDIO EQUIPMENT RCA/3.
www.zfxtech.cn Copyright © 2007-2019 ZFX TECH.
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
